Which three are features of the integrated services routers?（）

相似题目

• Which three statements correctly describe the features of the I/O calibration process?（）

  A . Only one I/O calibration process can run at a time. B . It automates the resource allocation for the Automated Maintenance Tasks. C . It improves the performance of the performance-critical sessions while running. D . It can be used to estimate the maximum number of I/Os and maximum latency time for the system. E . The latency time is computed only when the TIMED_STATISTICS initialization parameter is set to TRUE.

  查看最佳答案

• Which three statements about the Cisco Easy VPN feature are true？（）

  A . If the VPN server is configured for Xauth， the VPN client waits for a username / password challenge. B . The Cisco Easy VPN feature only supports transform sets that provide authentication and encryption. C . The VPN client initiates aggressive mode （AM） if a pre-shared key is used for authentication during the IKE phase 1 process. D . The VPN client verifies a server username/password challenge by using a AAA authentication server that supports TACACS+ or RADIUS. E . The VPN server can only be enabled on Cisco PIX Firewalls and Cisco VPN 3000 series concentrators. F . When connecting with a VPN client，the VPN server must be configured for ISAKMP group 1，2 or 5.

  查看最佳答案

• Which three statements about the features of SNMPv2 and SNMPv3 are true?（）

  A . SNMPv3 enhanced SNMPv2 security features B . SNMPv3 added the Inform protocol message to SNMP C . SNMPv2 added the Inform protocol message to SNMP D . SNMPv3 added the GetBulk protocol messages to SNMP E . SNMPv2 added the GetBulk protocol message to SNMP F . SNMPv2 added the GetNext protocol message to SNMP

  查看最佳答案

• Which three are features of the integrated services routers?（）

  A . VPN acceleration B . voice mail C . anti-X D . wireless LAN E . fixed configuration F . IPS

  查看最佳答案

• Which three features are added in SNMPv3 over SNMPv2? （）

  A . Message Integrity B . Compression C . Authentication D . Encryption E . Error Detectio

  查看最佳答案

• Which three of the following network features are methods used to achieve high availability？（）

  A . Spanning Tree Protocol （STP） B . Delay reduction C . Hot Standby Routing Protocol （HSRP） D . Dynamic routing protocols E . Quality of Service （QoS） F . Jitter management

  查看最佳答案

• Which three statements are true about the voice VLAN feature on a Catalyst 2950 switch？ （Choose  three.）（）  

  A .  The CoS value is trusted for 802.1p or 802.1q tagged traffic. B .  The voice VLAN feature is disabled by default. C .  The IP phone accepts the priority of all tagged and untagged traffic and sets the CoS value to 4. D .  When the voice VLAN feature is enabled， all untagged traffic is sent according to the default CoS priority of the port. E .  PortFast is automatically disabled when a voice VLAN is configured. F .  The default CoS value for incoming traffic is set to 0.

  查看最佳答案

• Which three features of the IMAP are available on a Cisco Unity Express module?（）

  A . Download e-mail messages as attachments to voice-mail messages.  B . Access voice-mail messages from general delivery mailboxes (GDM)s.  C . Access voice-mail messages over the network or download them selectively.  D . Delete voice-mail messages or mark them as read or unread in a manner similar to e-mail messages.  E . View instant messages and voice-mail messages from a single integrated e-mail type client using IMAP.  F . Play voice-mail locally using standard media players without requiring a connection to Cisco Unity Express.

  查看最佳答案

• Cisco IOS XR Software Multicast Routing Implementation， which three features are supported in IPv6 onCisco CRS router？（）

  A . PIM-SSM B . Aggregation multicast C . PIM-Bidirectional D . OOR handling E . integrated multicast F . Multicast NSF

  查看最佳答案

• Which three features are supported in a license for Cisco Unified Contact Center Express Enhanced? （）

  A . database integration   B . prompt and collect   C . VoiceXML   D . opening and parsing HTTP and XML documents   E . PQ   F . E-mail Queuing&e

  查看最佳答案

• Which three options are features of VTP version 3？（）

  A . VTPv3 supports 8K VLANs. B . VTPv3 supports private VLAN mapping. C . VTPv3 allows for domain discovery. D . VTPv3 uses a primary server concept to avoid configuration revision issues. E . VTPv3 is not compatible with VTPv1 or VTPv2. F . VTPv3 has a hidden password option.

  查看最佳答案

• Which three features are provided by Oracle Net Services？ （）

  A . Data encryption. B . User authentication. C . Transparent data conversion D . Configuration and administration mechanisms. E . Support for multiple network transport protocols.

  查看最佳答案

• Which three statements about VTP features are true?（）

  A . When properly configured,VTP minimizes VLAN misconfigurations and configuration inconsistencies B . Each broadcast domain on a switch can have its own unique VTP domain C . VTP works at Layer 3 of the OSI model and requires that a management VLAN IP address be configured. D . When properly configured,VTP maintains VLAN configuration consistency and accelerates trunk link negotiation. E . VTP pruning is used to increase available bandwidth in trunk links F . Client,server,and transparent are valid VTP modes G . To configure a switch to be part of two VTP domains,each domain must have its own password

  查看最佳答案

• Which three statements correctly describe the features of the I/O calibration process？（）

  A .  Only one I/O calibration process can run at a time B .  It automates the resource allocation for the Automated Maintenance Tasks C .  It improves the performance of the performance-critical sessions while running D .  It can be used to estimate the maximum number of I/Os and maximum latency time for the system E .  The latency time is computed only when the TIMED_STATISTICS initialization parameter is set to TRUE

  查看最佳答案

• Which three of the following network features are methods used to achieve high availability（）

  A . Spanning Tree Protocol（STP） B . Delay reduction C . Hot Standby Routing Protocol（HSRP） D . Dynamic routing protocols E . Quality of Service（QoS） F . Jitter management

  查看最佳答案

• Which three features are provided by Recovery Manager and NOT provided by user-managed backup and recovery？（）

  A . Online backups. B . Skipping unused block.  C . Partial database backups. D . Incremental block-level backup. E . Detection of corrupted blocks during backup.

  查看最佳答案

• Which three features are added in SNMPv3 over SNMPv2 ? （）

  A . Message Integrity B . Authentication C . Encryption D . Compression E . Error Detectio

  查看最佳答案

• Which three options are features of the Cisco 3800 Series Integrated Services Routers?（）

  A . Integrated Hardware for offload of encryption services B . Wireless LAN C . SRST with centralized Cisco CallManager fro up to 120 IP Phones D . Support For up to Eight NMEs E . Cisco CallManager Express for up to 36 IP Phones support F . High Performance Architecture optimized for concurrent service deployment

  查看最佳答案

• Which three beneficial features are found on the Cisco.com website?（）

  A . online product and technology information B . knowledge transfer resources C . online hardware replacement D . tools to minimize the risk of network downtime E . network management and diagnostic tools F . online solution troubleshooting

  查看最佳答案

• The Cisco AutoQoS feature is being used throughout the Company VOIP network.  Which three  statements about this feature are true？（）

  A . The "mls qos" global configuration command must be entered before configuring AutoQoS. B . CEF must be enabled. C . The "no auto qos voip" command is used to disable Cisco AutoQos and revoke all  configurations generated by Cisco AutoQos. D . CDP must be enabled. E . SNMP must be enabled.

  查看最佳答案

• The DAI feature has been implemented in the Company switched LAN.  Which three statements  are true about the dynamic ARP inspection （DAI） feature？ （）

  A .  DAI can be performed on ingress ports only. B .  DAI can be performed on both ingress and egress ports. C .  DAI is supported on access ports， trunk ports， EtherChannel ports， and private VLAN ports.   D .  DAI should be enabled on the root switch for particular VLANs only in order to secure the ARP  caches of hosts in the domain. E .  DAI should be configured on all access switch ports as untrusted and on all switch ports connected to other switches as trusted. F .  DAI is supported on access and trunk ports only.

  查看最佳答案

• Which three statements are true when configuring Cisco IOS Firewall features using the SDM？ （）

  A . A custom application security policy can be configured in the Advanced Firewall Security Configuration dialog box. B . An optional DMZ interface can be specified in the Advanced Firewall Interface Configuration dialog box. C . Custom application policies for e-mail， instant messaging， HTTP， and peer-to-peer services can be created using the Intermediate Firewall wizard. D . Only the outside （untrusted） interface is specified in the Basic Firewall Interface Configuration dialog box. E . The outside interface that SDM can be launched from is configured in the Configuring Firewall for Remote Access dialog box. F . The SDM provides a basic， intermediate， and advanced firewall wizard.

  查看最佳答案

• Which three statements about the DHCP snooping feature on Cisco Nexus switches are true？ （）

  A .  DHCP snooping commands are not available until the feature is enabled with the feature dhcp- snooping command. B .  When you enable the DHCP snooping feature， the switch begins building and maintaining the DHCP snooping binding database. C .  The switch will not validate DHCP messages received or use the DHCP snooping binding database to validate subsequent requests from untrusted hosts until DHCP snooping is enabled globally and for each specific VLAN. D .  Globally disabling DHCP snooping removes all DHCP snooping configuration on the switch. E .  Globally disabling DHCP snooping does not remove any DHCP snooping configuration or the configuration of other features that are dependent upon the DHCP snooping feature.

  查看最佳答案

• There is no single definition for all risks but there are three key features of all risks, which are event, likelihood and loss.

  查看最佳答案