BGP协议用peer default-route-advertise命令来设置给邻居发布缺省路由的同时。关于本地的BGP路由表哪个描述是正确的?()
相似题目
-
Which of these best identifies the types of prefixes a router running BGP will advertise to an EBGP peer? ()
-
路由选择工具route-policy能够基于预先定义的条件来进行过滤并且设置BGP属性,所以它经常被用来定义针对BGP peer的策略,也经常在路由生成时期被使用,缺省情况下,所有未匹配的路由被拒绝通过route-policy
-
BGP路由协议用哪个协议的哪个端口进行通信:()
-
以下关于BGP Peer Group描述正确的是?()
-
Which BGP community is used to prevent the advertisement of the BGP prefix to other BGP peers?()
-
Which types of prefixes will a router running BGP most likely advertise to an IBGP peer, assuming it is notconfigured as a route reflector?()
-
BGP peers communicate via which method?()。
-
I-BGP协议用于建立处于同一自治域的路由器之间的Peer关系
-
Two BGP peers connected through a routed firewall are unable to establish a peering relationship. What could be the most likely cause? ()
-
BGP下有如下配置: Timer keep alive 30 hold 30 Peer 1.1.1.2 timer keepalive 10 hold 30 下面哪些描述是错误的()
-
两台路由器通过多条物理线路建立一个逻辑BGP对等体时,必须使用peer connect-interface命令
-
关于BGP协议中“peer peer-add next-hop-local”命令,下列说法错误的是()
-
What action will a BGP route reflector take when it receives a prefix marked with the community attribute NO ADVERTISE from a client peer?()
-
In which state can BGP peers exchange Update messages?()
-
Two BGP peers connected through a routed firewall are unable to establish a peering relationship. What could be the most likely cause?()
-
Router R1, in ASN 11, learns a BGP route from BGP peer R22 in ASN 22. R1 and then uses BGP to advertise the route to R2, also in ASN 11. What ASNs would you see in the BGP table on R2 for this route?()
-
BGP GR中,BGP Peer通过以下哪个报文协商是否具备GR能力()。
-
Which three options are valid ways to filter routes from a BGP peer?()
-
BGP Routes with which community will not advertise to any peers?
-
Which of these best identifies the types of prefixes a router running BGP will advertise to an EBGP peer?()
-
动态的BGP MPLS L3VPN中釆用如下哪项技术区分在BGP协议中不同的VPN中相同的IP地址前缀?()
-
下面是路由器A的BGP部分配置,根据给出的配置,描述错误的是【RouterA】 bgp 10【RouterA-bgp】 Router-ID 1.1.1.1 【RouterA-bgp】 peer 200.1.4.2 as as-number 30 【RouterA-bgp】 peer 200.1.4.2 as as-number 20 【RouterA-bgp】 import-route direct()
-
下面是路由器A的BGP部分配置,则根据配置,判断下列选项描述正确的是:()[RouterA] bgp 10[RouterA-bgp] router-id 1.1.1.1[RouterA-bgpl peer 200.1.4.2 as-number 30[RouterA-bgpI peer 200.1.2.2 as-number 20[RouterA-bgp]import-route direct
-
BGP协议用Peer default-mute-advertise命令来给邻居发布缺省路由,与此同时,关于本地BGP路由表的变化描述,正确的是()