What can be done to try to reduce the number of protocol vlolations？（）

相似题目

• The chart of a beach area shows a very flat slope to the underwater beach bottom. What type of breakers can be expected when trying to land a boat on this beach? （）

  A . Surging B . Spilling C . Plunging D . Converging

  查看最佳答案

• An administrator tries to change the checksum_offload setting on ent0, but the chdev command responds that the adapter is busy. What can be done to resolve this?（）

  A . Use chdev with -P flag and run cfgmgr. B . Use chdev with -R flag and run cfgmgr. C . Use chdev with -P flag and reboot the system. D . Use chdev with -R flag and reboot the system.

  查看最佳答案

• What needs to be done before you can start the upgrade?（）https://assets.asklib.com/images/image2/2018073017485275935.jpg

  A . On the Windows 95 computer， replace the CPU with a faster model. B . On the Windows 95 computer， reformat the disk with FAT32. C . On the Windows 98 computer， reformat the disk with FAT32. D . On the Windows 98 computer， increase the amount of free disk space on the hard disk. E . On the Windows NT Workstation 4.0 computer， replace the CPU with a faster model. F . On the Windows NT Workstation 4.0 computer， increase the amount of free disk space on the hard disk.

  查看最佳答案

• Companycom will be using Virtual IO Server to share Ethernet adapters. What can be done to prevent network failure of the client if a Virtual IO Server goes down?（）

  A . Create two virtual adapters on the client， each one from a separate Virtual IO Server B . Enable dead gateway detection on the client so that the network traffic can be rerouted C . Have a spare network card on standby in the client in case the Virtual IO Server goes down D . Create an etherchannel adapter on the client using one Virtual Ethernet adapter from two separate Virtual IO Server

  查看最佳答案

• To keep performance optimal on a lightweight access point，what can be done？（）

  A . disable auto rf and configure manually. B . disable all 802.11b data rates. C . power access point to full power. D . hard code the channel.

  查看最佳答案

• An administrator tries to change the checksum_offload setting on ent0， but the chdev command responds that the adapter is busy.  What can be done to resolve this（）？  

  A . Use chdev with -P flag and run cfgmgr. B . Use chdev with -R flag and run cfgmgr. C . Use chdev with -P flag and reboot the system. D . Use chdev with -R flag and reboot the system.

  查看最佳答案

• To enable a tty port to be used for a cu session what must be done to the system？（）

  A . smit tty； take the defaults and create the desired tty B . In the /etc/uucp Devices add a line similar to： Direct ttyX - 9600 direct C . Install bos.net.uucp and the first available tty will be configured for use by a cu session D . Run the Asynchronous Terminal Emulation （ATE） program and it will configure a tty port for a cu sessio

  查看最佳答案

• What can be done to secure the virtual terminal interfaces on a router？（）

  A . Administratively shut down the interface. B . Physically secure the interface. C . Create an access list and apply it to the virtual terminal interfaces with the access-group command. D . Configure a virtual terminal password and login process. E . Enter an access list and apply it to the virtual terminal interfaces using the access-class command.

  查看最佳答案

• A network administrator needs to force a high-performance switch that is located in the MDF to become the root bridge for a redundant path switched network. What can be done to ensure that this switch assumes the role as root bridge?（）

  A . Establish a direct link from the switch to all other switches in the network. B . Assign the switch a higher MAC address than the other switches in the network have. C . Configure the switch so that it has a lower priority than other switches in the network. D . Configure the switch for full-duplex operation and configure the other switches for half-duplex operation. E . Connect the switch directly to the MDF router， which will force the switch to assume the role of root bridge.

  查看最佳答案

• After applying a new ACL on a device， its CPU utilization rose significantly and many messages starting with "%SEC-6-IPACCESSLOG" appeared on the Syslog server. What can be done to resolve this situation？（）

  A . Increase memory allocation for ACLs. B . Remove all entries from the ACL and use a single permit ip any any statement. C . Remove the log keyword from each ACL entry. D . Reboot the device after the ACL has been applied.

  查看最佳答案

• What should be done prior to backing up an IOS image to a TFTP server?（）

  A . Make sure that the server can be reached across the network. B . Check that authentication for TFTP access to the server is set. C . Assure that the network server has adequate space for the IOS image. D . Verify file naming and path requirements. E . Make sure that the server can store binary files. F . Adjust the TCP window size to speed up the transfer.

  查看最佳答案

• What can be done to secure the virtual terminal interfaces on a router?（）

  A . Administratively shut down the interface. B . Physically secure the interface. C . Create an access list and apply it to the virtual terminal interfaces with the access-group command. D . Configure a virtual terminal password and login process. E . Enter an access list and apply it to the virtual terminal interfaces using the access-class command.

  查看最佳答案

• You wish to increase the security of all of the routers within your network. What can be done to secure the virtual terminal interfaces on a router?（）

  A . Administratively shut down the interface. B . Physically secure the interface. C . Create an access list and apply it to the virtual terminal interfaces with the access-group command. D . Configure a virtual terminal password and login process. E . Enter an access list and apply it to the virtual terminal interfaces using the access-class command.

  查看最佳答案

• Companycom purchased a new p5 570 without a HMC. The customer does not know how to power the full frame/system off since there does not appear to be an on/off button. What can be done to accomplish this task?（）

  A . Telnet into the machine and do a shutdown -Fr B . Log into ASMI as Administrator and use ASMI menus C . Log into the service processor using WebSM and use ASMI menus D . Use the off button which is located to the left below the LED

  查看最佳答案

• What can be done to enable the debug information for functions to be displayed when using ‘ksh - x’to debug a script?（）

  A . Run the script using 'ksh -fx'. B . Run the script using 'ksh -a function -x'. C . Edit the script and add 'set -x' at the beginning. D . Edit the script and add 'set -x' at the beginning of each function.

  查看最佳答案

• Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?（）

  A . Enable DHCP server on the HMC B . Configure host name and IP address on DNS server C . Manually set the IP address of the service processor D . Connect a RS-232 cable from the HMC to the service processor

  查看最佳答案

• What can be done to enable the debug information for functions to be displayed when using‘ksh -x’to debug a script？（）

  A . Run the script using ‘ksh -fx’. B . Run the script using ‘ksh -a function -x’. C . Edit the script and add ‘set -x’ at the beginning. D . Edit the script and add ‘set -x’ at the beginning of each function.

  查看最佳答案

• An administrator mistakenly shutdown production after a fallover because the service IP address  Was shifted from the normal production node to the standby node.  What can be done to avoid this type of mistake in the future？（）  

  A .  Include the service IP address in the administrator’s PS1 prompt B .  Alias the service IP address to the hostname in the /etc/host file C .  Define a persistent IP address with HACMP and make it a practice to use the persistent address for administration work D .  Add a DNS entry to map the standby node name to the service IP address so telnet connections will be to the correct node

  查看最佳答案

• A 1500 page print job was sent to the "pcl" queue. The job was running for several minutes before it was determined that the job was not needed. What can be done to delete the job？（）https://assets.asklib.com/images/image2/2018080214062133209.jpg

  A . kill 201 B . cancel 201 C . disable pcl D . rm /var/spool/lpd/STDIN.27648

  查看最佳答案

• While executing a Cluster Test Plan， the administrators realize that they will need to email the  Operations and network on-call staff in the event of a network outage.  What can be done to alert the on-call staff of network failures？（）   

  A .  Customize clstat to send a mail message. B .  Customize an Event Notification method. C .  Customize an Error Notification method. D .  Customize clinfo to send an SNMP trap.

  查看最佳答案

• What can be done in a computer prior to CAD

  查看最佳答案

• The government claims to be trying to do all it can to ________ corruptions, but it is usually easier said than done, so the public is pessimistic about it.

  查看最佳答案

• What I&39;d like to do is to help them to see that they don&39;t need to think they will never succeed in learning to use the computer and stop trying it, that they can actually be the master of it. (give up on)

  查看最佳答案