Which two of these are characteristics of an IPS device?（）

相似题目

• Which two of these are characteristics of Metro Ethernet？（）

  A .  class of service B .  bandwidth profiles C .  user-network interface D .  Ethernet LAN circuit attributes E .  Ethernet virtual circuit attribute

  查看最佳答案

• Which two of these are correct regarding access control lists？ （Choose two.）  （）

  A .  An ACL can be applied to multiple interlaces. B .  An ACL wildcard mask is identical to an IP subnet mask. C .  There may be multiple ACLs per protocol， per direction， and per interface. D .  There is an "implicit deny" at the end of an ACL and will result in a dropped packet. E .  An ACL acts on all packets， those flowing thru the router and those originated by the router itself. F .  An ACL will be processed from top to bottom and may have multiple matches that will act on the packet that is being tested.

  查看最佳答案

• Which two of these are ways that cisco capital helps partners?()

  A . counts as double toward quarterly sales goals B . expands customer relationships C . require customers to lease or buy new equipment when the lease expires D . increases the customer capital budget E . increases marginsand cash flow

  查看最佳答案

• Which two of these are characteristics of the 802.1Q protocol?（）

  A . it is a layer 2 messaging protocol which maintains vlan configurations across network. B . it includes an 8-bit field which specifies the priority of a frame. C . it is used exclusively for tagging vlan frames and dose not address network reconvergence following switched network topology changes. D . it modifies the 802.3 frame header,and thus requires that the FCS be recomputed. E . it is a trunking protocol capable of carring untagged frames.

  查看最佳答案

• Which two of these Cisco Catalyst are distribution-area switches？ （）

  A .  Catalyst 2800/E Series B .  Catalyst 3750 Series C .  Catalyst 3900/E Series D .  Catalyst 4500/E Series E .  Catalyst 6500/E Serie

  查看最佳答案

• Which two of these are recommended practices with trunks? （）

  A . use ISL encapsulation B . use 802.1q encapsulation C . set ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiation D . use VTP server mode to support dynamic propagation of VLAN information across the network E . set DTP to desirable and desirable with encapsulation negotiate to support DTP protocol negotiation.

  查看最佳答案

• Which two of these multicast deployments are most susceptible to attacks from unknown sources?（）

  A . ASM B . BiDirPIM C . PIM-SMRP D . RP-Switchover E . SourceSpecificMulticast

  查看最佳答案

• Which two of these data encryption AIM modes are found on the 3800 family of Cisco ISR Routers？ （Choose two.）（）

  A .  BPII  B .  SPII-Plus  C .  FPII  D .  EPII-Plus  E .  HPII  F .  HPII-PIu

  查看最佳答案

• Which two of these are characteristics of MPLS VPNs？ （）

  A .  Layer 3 MPLS VPNs can forward only IP packets B .  Layer 2 MPLS VPNs can forward any network protocol C .  MPL S label paths are automatically formed based on Layer 2 frames D .  Layer 3 MPLS VPNs can forward any network protocol based on Layer 2 frames E .  In Layer 2 MPLS VPNS， the service provider controls the customer Layer 3 policie

  查看最佳答案

• Which two of these statements are true of IPv6 address representation?（）

  A . There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast. B . A single interface may be assigned multiple IPv6 addresses of any type. C . Every IPv6 interface contains at least one loopback address. D . The first 64 bits represent the dynamically created interface ID. E . Leading zeros in an IPv6 16 bit hexadecimal field are mandatory.

  查看最佳答案

• Which two of these parameters are used to determine a forwarding equivalence class？（）

  A . IP prefix B . Layer 2 circuit C . RSVP request from CE for bandwidth reservation D . BGP MED value

  查看最佳答案

• Which two of these are characteristics of an IDS sensor？（）

  A . passively listens to network traffic B . is an active device in the traffic path C . has a permissive interface that is used to monitor networks D . traffic arrives on one IDS interface and exits on another E . has a promiscuous interface that is used to monitor the network

  查看最佳答案

• Which two of these are advantages of placing the VPN device parallel to the firewall？（）

  A .  high scalability B .  the design supports a layered security model C .  firewall addressing does not need to change D .  IPsec decrypted traffic is inspected by the firewall E .  there is a centralized point for logging and content inspectio

  查看最佳答案

• Which two of these statements regarding RSTP are correct？（）

  A . RSTP cannot operate with PVST+. B . RSTP defines new port roles. C . RSTP defines no new port states. D . RSTP is a proprietary implementation of IEEE 802.1D STP. E . RSTP is compatible with the original IEEE 802.1D STP.

  查看最佳答案

• Which two of these are recommended practices with trunks？ （）

  A .  use ISL encapsulation B .  use 802.1q encapsulation C .  set ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiation D .  use VTP server mode to support dynamic propagation of VLAN information across the network  E .  set DTP to desirable and desirable with encapsulation negotiate to support DTP protocol negotiation.

  查看最佳答案

• Which two of these are recommended practices with trunks？（）

  A . use ISL encapsulation B . use 802.1q encapsulation C . set ISL to desirable and auto with encapsulation negotiate to support ILS protocol negotiation D . use VTP server mode to support dynamic propagation of VLAN information across the network E . set DTP to desirable and desirable with encapsulation negotiate to support DTP protocol negotiatio

  查看最佳答案

• Which two of these are characteristics of Metro Ethernet? （）

  A . class of service B . bandwidth profiles C . user-network interface D . Ethernet LAN circuit attributes E . Ethernet virtual circuit attribute

  查看最佳答案

• When HSRP is configured on a network, which two of these items are provided, which are sharedbetween the routers that run HSRP? （）(Choose two.)

  A . TCP-based hello packets B . the impact of flapping links if timers are too low C . a shared single interface D . the ability to track serial interfaces E . UDP-based hello packet

  查看最佳答案

• Which two of these are characteristics of multicast routing？ （）

  A .  multicast routing uses RPF B .  multicast routing is connectionless. C .  In multicast routing， the source of a packet is known. D .  When network topologies change， multicast distribution trees are not rebuilt， but use the originalpath E .  Multicast routing is much like unicast routing， with the only difference being that it has a a groupof receivers rather than just one destinatio

  查看最佳答案

• For which two of these purposes are Cisco Spectrum Expert used?（）

  A . audit VoWLAN cell edge coverage B . verify RFID tag coverage by four access points at -75 dBm C . audit microwave oven interference D . audit 802.11a channel 36 utilization E . create test scripts for 802.11n bonded channel throughput test

  查看最佳答案

• Which two of these are advantages of placing the VPN device parallel to the firewall?（）

  A . high scalability B . the design supports a layered security model C . firewall addressing does not need to change D . IPsec decrypted traffic is inspected by the firewall E . there is a centralized point for logging and content inspectio

  查看最佳答案

• Which two of these statements regarding RSTP are correct?（）

  A . RSTP cannot operate with PVST+. B . RSTP defines new port roles. C . RSTP defines no new port states. D . RSTP is a proprietary implementation of IEEE 802.1D STP. E . RSTP is compatible with the original IEEE 802.1D STP.

  查看最佳答案

• Which two of these are characteristics of an IPS device？（）

  A .  passively listens to network traffic B .  is an active device in the traffic path C .  has a permissive interface that is used to monitor networks D .  traffic arrives on one IPS interface and exits on another

  查看最佳答案

• Which two of these are characteristics of the 802.1Q protocol？（）

  A . it is a layer 2 messaging protocol which maintains vlan configurations across network. B . it includes an 8-bit field which specifies the priority of a frame. C . it is used exclusively for tagging vlan frames and dose not address network reconvergence following switched network topology changes. D . it modifies the 802.3 frame header，and thus requires that the FCS be recomputed. E . it is a trunking protocol capable of carring untagged frames.

  查看最佳答案