-
You are designing an Active Directory site infrastructure to meet the bussiness and technical requirements. What should you do？ （）
A . Create one site for each office and each local bank.
B . Create one site for all offices. Create one site for all local banks.
C . Create one site for Amsterdam. Create one site for all branch office and all local banks.
D . Create one site for Amsterdam. Create one site for the Utercht brach office. Create one site for that Hague branch office. Place half the local banks in the utercht site and half the local banks in the Hague site.
E . Create one site for Amsterdam. Create one site for the Utercht brach office. Create one site for each local bank that has more than 50 users. Place all the other local banks in the Amsterdam Site.
-
You are designing an Active Directory forest structure to meet the business and technical requirements. What should you do?（）
A . Create a single forest that has one domain. Use OUs to separate the departments.
B . Create a single forest that has multiple domains to represent every department.
C . Create a single forest that has three domains: one for finance, one for HR, and one for the remaining departments.
D . Create multiple forests that have a single domain in each forest to represent the departments.
-
Your network contains a single Active Directory domain. The functional level of the forest is Windows Server 2008 R2. You need to enable the Active Directory Recycle Bin. What should you use（）
A . the Dsmod tool
B . the Enable-ADOptionalFeature cmdlet
C . the Ntdsutil tool
D . the Set-ADDomainMode cmdlet
-
Your archive-log destination directory runs out of space. What is the impact of this on the database?（）
A . None. The database will switch over to the stand-by archive-log destination directory.
B . A warning message will be written to the alert log of the database, but no adverse impacts to the database will be experienced.
C . The database will shut down, and will not restart until you correct the out-of-space situation.
D . The database will continue to try to write to the archive-log destination directory for one hour. After one hour, the database will shut down normally.
E . Once Oracle has cycled through all online redo logs, it will stop processing any DML or DDL until the out-of-space condition is corrected.
-
Given the following directory structure：
https://assets.asklib.com/images/image2/2018080111495059911.jpg
And the following command line invocation：
javac –d classes source/Utils.java
Assume the current directory is bigProject， what it the result？（）
A . If the compile is successful， Utils.class is added to the source directory.
B . The compiler returns an invalid flag error.
C . If the compile is successful， Utils.class is added to the classes directory.
D . If the compile is successful， Utils.class is added to the bigProject directory.
-
You are designing the Active Directory infrastructure to meet the business and technical requirements. You run ADSizer, and find that it provides a solution that contains only one domain controller for Amsterdam. What should you do?（）
A . Place at least two domain controllers in Amsterdam.
B . Configure the domain controller as a bridgehead server.
C . Configure the domain controller as a global catalog server.
D . Distribute the users among sites in ADSizer and recalculate the number of domain controllers.
-
You are designing a site topology for the new Active Directory environment. What should you do？ （）
A . Create one site for all offices. Place the subnets for the four branch offices and the Sydney main office in this site.
B . Create two sites： one site for the four branch offices and one site for the Sydney main office. Place the subnets for the branch offices in one site. Place the subnet for the Sydney main office in the other site.
C . Create three sites： one site for the four branch offices， one site for the Sydney main office， and one site for the Sydney satellite offices.
D . Create four sites： one for the Melbourne and Perth branch offices， one site for the Berlin and Paris branch offices， one site for the Sydney main office， and one site for the Sydney satellite offices.
E . Create five sites； one site for the Melbourne branch office， one site for the Perth branch office， one site for the Berlin branch office， one site for the Paris branch office， and one site for the Sydney main office. Place the subnets for each branch office and the Sydney main office in their respective sites.
-
Your network contains a single Active Directory domain. The functional level of the forest is Windows Server 2008 R2. You need to enable the Active Directory Recycle Bin. What should you use（）
A . the Dsmod tool
B . the Enable-ADOptionalFeature cmdlet
C . the Ntdsutil tool
D . the Set-ADDomainMode cmdlet
-
You need to configure Active Directory to implement the new password policy for the HR department. What should you do？（）
A . Create a new child domain named hr.ad.margiestravel.com in the existing forest. Move the resources from the HR OU to this new domain. Add the appropriate security settings in the Default Domain Policy for this new domain.
B . Add the appropriate security settings to the current Default Domain Policy.
C . Add the appropriate security settings to the local security policy of SQL1.
D . Set the SQL server check_policy and check_expiration options to On when creating all user accounts.
-
An Active Directory database is installed on the C volume of a domain controller. You need to move the Active Directory database to a new volume What should you do（）
A . Move the ntds，dit file to the new volume by using Windows Explorer.
B . Copy the ntds，dit file to the new volume by using the ROBOCOPY command.
C . Move the ntds，dit file to the new volume by using the Files option in the Ntdsutil utility .
D . Move the ntds，dit file to the new volume by running the Move-item command in Microsoft Windows powerShell.
-
Your company has an Active Directory domain. You log on to the domain controller. The Active Directory Schema snap-in is not available in the Microsoft Management Console （MMC）. You need to access the Actrve Directory Schema snap-in. What should you do（）
A . Register Schmmgml.dll.
B . Log off and log on again by using an account that is a member of the Schema Administrators group.
C . Use the Ntdsutil.exe command to connect to the Schema Master operations master and open the schema for writing.
D . Add the Active Directory Lightweight Directory Services （AD LDS） role to the domain controller by using Server Manager.
-
What command will allow the operator to add the current working directory to the command search path?（）
A . export PATH=pwd
B . export PATH=$PWD
C . export PATH=$PATH:pwd
D . export PATH=$PATH:$PWD
-
Your archive-log destination directory runs out of space. What is the impact of this on the database？（）
A . None. The database will switch over to the stand-by archive-log destination directory.
B . A warning message will be written to the alert log of the database，but no adverse impacts to the database will be experienced.
C . The database will shut down，and will not restart until you correct the out-of-space situation.
D . The database will continue to try to write to the archive-log destination directory for one hour. After one hour，the database will shut down normally.
E . Once Oracle has cycled through all online redo logs，it will stop processing any DML or DDL until the out-of-space condition is corrected.
-
You are designing the Active Directory infrastructure to meet the business and technical requirements. You run ADSizer， and find that it provides a solution that contains only one domain controller for Amsterdam. What should you do？（）
A . Place at least two domain controllers in Amsterdam.
B . Configure the domain controller as a bridgehead server.
C . Configure the domain controller as a global catalog server.
D . Distribute the users among sites in ADSizer and recalculate the number of domain controllers.
-
Your company has a single Active Directory directory service forest with three domains. You plan to modify the Active Directory schema. You need to identify the schema master for the forest. What should you do？（）
A . Run the regsvr32 schmmgmt.dll command. Use the Active Directory Domains and Trusts snap-in.
B . Run the regsvr32 schmmgmt.dll command. Use the Active Directory Users and Computers snap-in.
C . Use the Dsget command-line tool.
D . Use the Dsquery command-line tool.
-
What is the default amount of time that an automounted directory stays mounted？（）
A . 1minute
B . 5minutes
C . 10minutes
D . 30minute
-
You are designing a site topology for the new Active Directory environment. What should you do?（）
A . Create one site for all offices. Place the subnets for the four branch offices and the Sydney main office in this site.
B . Create two sites: one site for the four branch offices and one site for the Sydney main office. Place the subnets for the branch offices in one site. Place the subnet for the Sydney main office in the other site.
C . Create three sites: one site for the four branch offices, one site for the Sydney main office, and one site for the Sydney satellite offices.
D . Create four sites: one for the Melbourne and Perth branch offices, one site for the Berlin and Paris branch offices, one site for the Sydney main office, and one site for the Sydney satellite offices.
E . Create five sites; one site for the Melbourne branch office, one site for the Perth branch office, one site for the Berlin branch office, one site for the Paris branch office, and one site for the Sydney main office. Place the subnets for each branch office and the Sydney main office in their respective sites.
-
Given the following directory structure: bigProject --source --Utils.java --classes -- And the following command line invocation: javac -d classes source/Utils.java Assume the current directory is bigProject,what is the result? （）
A . If the compile is successful, Utils.class is added to the source directory.
B . The compiler returns an invalid flag error.
C . If the compile is successful, Utils.class is added to the classes directory.
D . If the compile is successful, Utils.class is added to the bigProject directory.
-
Given the following directory structure： bigProject --source --Utils.java --classes -- And the following command line invocation： javac -d classes source/Utils.java Assume the current directory is bigProject，what is the result？（）
A . If the compile is successful， Utils.class is added to the source directory.
B . The compiler returns an invalid flag error.
C . If the compile is successful， Utils.class is added to the classes directory.
D . If the compile is successful， Utils.class is added to the bigProject directory.
-
What do the entries in the /proc directory represent？（）
A . They are the decimal numbers corresponding to the active process IDs.
B . They are the decimal numbers corresponding to the gid of the system group.
C . They are the decimal numbers corresponding to the block IDs of the boot sector.
D . They are the decimal numbers corresponding to the inodes of the system directories.
-
You are the network administrator for The network consists of a single Active Directory domain named All servers run Windows Server 2003.The network contains a Web server that runs IIS 6.0 and hosts a secure intranet site. All users are required to connect to the intranet site by authenticating and using HTTPS. However, because an automated Web application must connect to the Web site by using HTTP, you cannot configure the intranet site to require HTTPS.You need to collect information about which users are connecting to the Web site by using HTTPS.What should you do？（）
A. Check the application log on the Web server.
B. Use Network Monitor to capture network traffic on the Web server.
C. Review the log files created by IIS on the Web server.
D. Configure a performance log to capture all Web service counters. Review the performance log data.
-
You are the network administrator for The network consists of a single Active Directory domain named The domain contains 352,000 Windows 2000 Professional computers.You install and configure Software Update Services (SUS) on a server named TestKing3. You need to scan all computers in the domain to find out whether they have received all approved updates that are located on the SUS server.What should you do？（）
A. On a server, install and run the mbsacli.exe command with the appropriate configuration switches.
B. On a server that runs IIS, install and configure urlscan.exe.
C. Edit and configure the Default Domain Policy to enable the Configure Automatic Updates policy.
D. From a command prompt on TestKing3, run the netsh.exe command to scan all computers in the domain.
-
You are the network administrator for TestKing. The network consists of a single Active Directory domain named testking.com. All domain controllers run Windows Server 2003.The sales department recently hired 10 new employees. User accounts for these employees were created in Active Directory. The manager of the sales department sent you a list of a new users and asked you to add the user accounts to an existing global group named SalesDept.You need to add the users to the SalesDept global group.What are two possible ways to achieve this goal？ Each correct answer presents a complete solution. Choose two.（）
A. Use the dsadd user command to add the user accounts to the SalesDept global group.
B. Use the dsadd group command to add the user accounts to the SalesDept global group.
C. In Active Directory Users and Computers, select all 10 user accounts. Right-click the selected users, and then select the Properties menu command.
D. In Active Directory Users and Computers, select all 10 user accounts. Right-click the selected users, and then select the Add to a Group menu command.
-
You are the administrator of an Active Directory domain named A user reports that he forgot his password and cannot log on to the domain. You discover that yesterday morning the user reset his password and successfully logged on to the domain.You need to enable the user to log on to the domain.What should you do？ （）(Choose two)
A. Use Active Directory Users and Computers to move the account to the default organizational unit (OU) named Users. Instruct the user to restart his computer.
B. Use Active Directory Users and Computers to open the account properties for the user‘s user account. Clear the Account is locked out check box, and select the User must change password at next logon check box.
C. Use Active Directory Users and Computers to reset the user‘s password. Give the user the new password.
D. Use Computer Management to reset the password for the local Administrator account.
