A system was rebooted and is taking a long time toreturn. The administrator has logged into the HMC and sees reference code 0c9. What does this mean?（）

相似题目

• The options on the NFS server using the nfso command have been adjusted.  Which of the following tasks are required in order for these changes to survive a system reboot？（）

  A . update /etc/rc.nfs B . issue the chnfs command C . recycle nfsd D . unmount and remount the file system

  查看最佳答案

• A patch has been applied to the operating system.  After rebooting, the system is hung.  Which of the following commands should have been performed to prevent the system from hanging?（）

  A .  lppchk, bosboot  B .  lslpp -l, oslevel  C .  installp -C, lppchk  D .  bosboot, synclvodm&e

  查看最佳答案

• After a system has rebooted from a system crash, which of the following commands should be run to find the location of the dump?（）

  A .  lsvg -l rootvg  B .  sysdumpdev -e  C .  sysdumpdev -L  D .  cd /var/adm/ra

  查看最佳答案

• A system without a monitor has crashed. The administrator would like to see the console output to determine a possible cause of the crash and ensure that there were no problems on reboot. Which command would be used？（）

  A . alog B . swcons C . lscons D . syslog

  查看最佳答案

• A graphics card has been added to the system. After rebooting, the system hangs during the login process with a blue screen indicating "CDE please wait". Which of the following procedures should be performed next?（）

  A . Reinstall the CDE software B . Check the name resolution C . Uncomment the last line in .dtprofile D . Boot in maintenance mode and perform fsck on file system

  查看最佳答案

• The rootvg disk on a system failed and was replaced. The system was restored using the latest mksysb. However， no files in the /home filesystem were restored. What is the likely cause of this problem？（）

  A . The new drive is too small to hold the entire rootvg B . The /home filesystem was not mounted during creation of the mksysb C . The /home stanza in the bosinst.data contained an entry ’restore=no’ D . The /home filesystem was NFS exported to another system during creation of the mksy

  查看最佳答案

• After adding a new Ethernet card to a system and rebooting， the system administrator notices the card was not configured. How can the system administrator determine if there were errors during the configuration process for the card？（）

  A . Examine the bootlog with the command： alog -o -f /var/adm/ras/bootlog B . Display the device attributes and errors with the command： lsdev -C -l ent0 C . Examine the AIX errlog for configuration method errors with the command： errpt -a -C ent0 D . Examine the ODM for configuration errors with the command： odmget -q "method_errors" ent0

  查看最佳答案

• A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）

  A . All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT. B . There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port. C . The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus. D . The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.

  查看最佳答案

• After the LED display is flashing 888 and the system is rebooted, which of the following commands should be used to gather dump information?（）

  A . snap  B . errpt  C . kdb  D . trace

  查看最佳答案

• A system administrator is preparing to run a preservation install and would like to use and hdisk that was no longer needed in datavg. Which of the following processes should be used to make it available for configuration?（）

  A . chdeb -1 hdiskxxx -a pv=clear; chdev -1 hdiskxx -a pv=yes B . exportvg datavg; importvg -y rootvg hdiskxx C . rmdev -1 hdiskxxx; mkdev -1 hdiskxxx -a pv=avail D . reducevg datavg hdiskxxx; extendvg rootvg hdiskxxx

  查看最佳答案

• A modem is set up for a remote TTY connection that will become the system console.  How should one verify that the console is enabled as the system console after the next reboot？（）

  A . lscons -b B . lscons -d C . lscons -s D . swcons /dev/tty0

  查看最佳答案

• During reboot the system hangs with an LED 0554 message that means， "The boot device could not be opened or a read failed." What recovery procedures should be taken？（）

  A . Boot in maintenance and use fsck to check hd5. B . Boot in maintenance mode， access the rootvg and check the /etc/inittab for corruption. C . Boot in maintenance mode， access the rootvg and rebuild the boot image using the bosboot command. D . Boot in maintenance mode， access the rootvg and use the bootlist command to create a valid boot list.

  查看最佳答案

• A system administrator would like to set a system to reboot after a crash.  What is the best way to do this？（）

  A .  smit chgsys B .  bosboot C .  smit dump D .  bootlist -r

  查看最佳答案

• A system was rebooted and is taking a long time to return. The administrator has logged into the HMC and sees reference code 0c9. What does this mean（）？ 

  A . The system is configuring a device. B . A system initiated dump has started. C . The system is varyingon a volume group. D . The system is running an inbuilt self test.

  查看最佳答案

• Which command should an administrator use to put a system in maintenance mode without rebooting？（）  

  A . init 0 B . telinit m C . shutdown -FM D . sh /etc/rc.maint

  查看最佳答案

• A system administrator issued the errpt command and had no results. The system administrator determined that error logging was turned off. Which of the following commands should be used to start logging system errors？（）

  A . /usr/bin/errmsg B . /usr/lib/errdemon C . /usr/lib/errlogger D . /usr/bin/errinstall

  查看最佳答案

• The operator needs to change the /test filesystem in the testvg volume group so that it mounts automatically following a system reboot. Which of the following commands is correct?（）

  A . chvg -a y testvg B . chfs -A yes /test C . mount /test -auto=yes D . chlv -a automount=y testlv

  查看最佳答案

• A system administrator identified a problem with an AIX command and implemented a work-around. A call was made to IBM Support to report the problem. What severity level should the administrator choose？（）

  A . Crit-Sit B . Severity 1 C . Severity 2 D . Severity 3

  查看最佳答案

• Company.com recently experienced an unanticipated system outage when the VIO server was upgraded. The current p5-570 has six Micro-Partitions and a VIO server partition. How can a similar outage be avoided in the future？（）

  A . Use DLPAR to avoid an outage. B . Deploy a redundant VIO server in the POWER5 system. C . Add additional Host Bus Adapters and Network adapters to the VIO server. D . Implement a standby server and move all partitions to it before applying future updates.

  查看最佳答案

• Simultaneous Multithreading （SMT） is enabled in a POWER6 VIO client running AIX 6.1.  Which command would be used to disable it after the next operating system reboot is performed？（）

  A .  schedo -o smt=0 -p B .  smtctl -m off -w boot C .  chdev -l sys0 -a smt=off D .  echo 0 > /proc/sys/smt_enable

  查看最佳答案

• In 1988 the old system was ________ in the country and a new system was introduced to take effect in 1990.

  查看最佳答案

• A router has two paths to reach another network in a different autonomous system. Neither route was generated by the local router and both routes have the same default weight an d local preference values.Which statement is true about how BGP would select the best path？（）

  A. To influence one route to be preferred, its default local preference value will be changed via the use of the command bgp default local - preference 50 B. Th e router will prefer the shortest autonomous system path C. If the command bgp always - compare - med has been given, then the router will prefer the route with the highest MED D. The router will prefer the route with the lower MED

  查看最佳答案

• 听力原文：They installed a solar panel to provide the power, and instead of an old-fashioned telephone line, the Internet connection was provided by a wireless transmission system.

  (86)

  查看最佳答案

• A system administrator has just migrated a system from AIX V.4 x to Aix V5.x. The system is up and running and appears to be functioning properly. The following error message was received when running lppchk -vbos.rte V =4 R is ＞4 bos.rte V＞5bos.rte not installed. 5.1.0lslpp -l | grep bos.rte shows 5.1.0 Which of the following options is the most likely solution to this problem？（）

  A.bos.rte is corrupted and needs to be reinstalled. B.The system administration needs to reboot the system. C.The /root part of bos.rte was installed but not the user part. Reinstall the missing software. D.The update CD needs to be applied with the smitty update_all command.

  查看最佳答案