In a common rail engine, the fuel is injected into cylinders（）

相似题目

• STCW78/95 Convention describes that （） are laid down for the certification of engineer officers in charge of a watch in a traditionally manned engine room, or the designated engineer in a periodically unmanned engine room.

  A . available minimum requirements B . available maximum requirements C . mandatory minimum requirements D . mandatory maximum requirement

  查看最佳答案

• A common rail engine has only one or two high pressure pumps in operation at the same（）time, and the injection into each cylinder.

  A . can’t be controlled very precisely B . can’t be controlled as flexibly as the separate pump system C . can be controlled as flexibly as the separate pump system D . can be controlled more precisely and flexibly

  查看最佳答案

• （） are commonly used in mechanical-hydraulic governor（调速器） to sense engine speeds.

  A . Bulbs B . Bulks C . Flyweights D . Flywheel

  查看最佳答案

• 电控柴油机控制系统中，主要作用是对Common Rail中的油压控制、主起动阀的控制以及与其它系统通信，并对主机内部信号进行检测和传输的是（）。

  A . 气缸电子控制单元 B . 公共电子控制单元 C . WECS的辅助控制单元 D . 曲柄轴角度传感器

  查看最佳答案

• In the common rail system, excessive pressure in the header may be caused by （）

  A . improper adjustment of the bypass valve B . a dribble in the fuel injection nozzle C . insufficient leak-off through injection nozzle packing D . a malfunctioning injection nozzle

  查看最佳答案

• She has proved that she can be railed on in a crisis.

  A . lived on B . depended on C . lived off D . believed in

  查看最佳答案

• A diesel engine which is rated for normal operation at a crankshaft speed of 800 RPM, is commonly classed as a （）.

  A . slow-speed diesel B . medium-speed diesel C . high-speed diesel D . constant-speed diesel

  查看最佳答案

• For a diesel engine, individual cylinder performance is commonly determined by exhaust gas（）

  A . chemical analysis B . back pressure readings C . pyrometer readings D . infrared analysi

  查看最佳答案

• What is commonly used to create turbulence in a diesel engine combustion system?（）

  A . Shape of the piston crowns B . Increasing the compression ratios C . Increasing the piston crowns D . Increasing the turbocharger gear ratio

  查看最佳答案

• Since rail network is not as extensive as highway network in most countries and its limitation to fixed track facilities, as a result, railroads provide （） service.

  A . Door to door B . Door to cy C . Door to cfs D . Terminal to terminal

  查看最佳答案

• A change in engine speed is required before a governor is able to make a corrective movement of fuel rackThis aspect of governing is commonly expressed as a percent and is known as （）

  A . governor sensitivity B . governor promptness C . speed droop D . isochronous governing

  查看最佳答案

• It's a common wish of all（）in a peaceful world.

  A . live B . living C . lived D . tolive

  查看最佳答案

• A restricted air intake to a diesel engine may result in the engine （）.

  A . failing to reach rated speed B . knocking under maximum load C . hunting or surging under light load D . overspeeding and running away

  查看最佳答案

• In America, it's common to add () to a bill as a tip.

  查看最佳答案

• Anxiety is a common mental problem in society.

  查看最佳答案

• The following are the common machines in a business center EXCEPT:

  查看最佳答案

• (I) A share of common stock in a firm represents an ownership interest in that firm. (II) A share of preferred stock is as much like a bond as it is like common stock.

  查看最佳答案

• CIM Rules apply to a contract of carriage by rail if the place of taking incharge of goods and the designated place of delivery are situated in （）.

  A、two different states B、two different customss C、two same states D、two different ports

  查看最佳答案

• Why isn’t the word“ sir” commonly used in Britain？

  <img src='https://img2.soutiyun.com/ask/uploadfile/2664001-2667000/0b24518b4123fdccbad600fac2ee2f95.gif' />

  查看最佳答案

• 听力原文：A passenger train has slammed into a double-decker bus at a rail crossing in rura

  听力原文： A passenger train has slammed into a double-decker bus at a rail crossing in rural Argentina, killing eighteen people and leaving almost fifty injured. The train was traveling fiom the capital Buenos Aires to the South Atlantic beach resort of Mar del Plata (7) when the collision occurred before dawn on Sunday near Dolores, about 200 kilometers south of the capital. (8) The bus was canwing 61 passengers and 2 dryers. One of the bus passengers said the bus had tried to beat the train to the crossing, despite the train sounding its horn repeatedly as it approached. The train's drivers also told investigators that the crossing barriers were down when the bus unexpectedly tried to cross the tracks in front of the train. Where did this accident happen？ A．In the capital Buenos Aires. B．Near the beach resort of Mar del Plata. C．Near Dolores. D．Not mentioned.

  查看最佳答案

• For a diesel engine, individual cylinder performance is commonly determined by exhaust gas_____________.

  A.chemical analysis B.back pressure readings C.pyrometer readings D.infrared analysis

  查看最佳答案

• Very common in a particular place or among a particular group:

  A．prevalent B．regulation C．vapor D．visualize

  查看最佳答案

• The decline in American manufacturing is a common refrain, particularly from Donald Trump. "Wedon&amp;39;t make anything anymore," he told Fox News, while defending his own made-in-Mexicoclothing line.

  Without question, manufacturing has taken a significant hit during recent decades, and further tradedeals raise questions about whether new shocks could hit manufacturing. But there is also a different way to look at the data. Across the country, factory owners are now grappling with a new challenge: instead of having toomany workers, they may end up with too few. Despite trade competition and outsourcing, Americanmanufacturing still needs to replace tens of thousands of retiring boomers every years. Millennialsmay not be that interested in taking their place, other industries are recruiting them with similar orbetter pay. For factory owners, it all adds up to stiff competition for workers－and upward pressure on wages. "They&amp;39;re harder to find and they have job offers," says Jay Dunwell, president of Wolverine CoilSpring, a family-owned firm, "They may be coming [into the workforce], but they&amp;39;ve been pluckedby other industries that are also doing an well as manufacturing," Mr. Dunwell has begun bringinghigh school juniors to the factory so they can get exposed to its culture. At RoMan Manufacturing, a maker of electrical transformers and welding equipment that his fathercofounded in 1980, Robert Roth keep a close eye on the age of his nearly 200 workers, five areretiring this year. Mr. Roth has three community-college students enrolled in a work-placementprogram, with a starting wage of $13 an hour that rises to $17 after two years. At a worktable inside the transformer plant, young Jason Stenquist looks flustered by the coppercoils he&amp;39;s trying to assemble and the arrival of two visitors. It&amp;39;s his first week on the job. Askedabout his choice of career, he says at high school he considered medical school before switching toelectrical engineering. "I love working with tools. I love creating." he says. But to win over these young workers, manufacturers have to clear another major hurdle: parents,who lived through the worst US economic downturn since the Great Depression, telling them toavoid the factory. Millennials "remember their father and mother both were laid off. They blame iton the manufacturing recession," says Birgit Klohs, chief executive of The Right Place, a businessdevelopment agency for western Michigan. These concerns aren&amp;39;t misplaced: Employment in manufacturing has fallen from 17 million in 1970to 12 million in 2013. When the recovery began, worker shortages first appeared in the high-skilledtrades. Now shortages are appearing at the mid-skill levels. " The gap is between the jobs that take to skills and those that require a lot of skill," says Rob Spohr,a business professor at Montcalm Community College. "There&amp;39;re enough people to fill the jobs atMcDonalds and other places where you don&amp;39;t need to have much skill. It&amp;39;s that gap in between, andthat&amp;39;s where the problem is." Julie Parks of Grand Rapids Community points to another key to luring Millennials intomanufacturing: a work/life balance. While their parents were content to work long hours, youngpeople value flexibility. "Overtime is not attractive to this generation. They really want to live theirlives," she says. A、says that he switched to electrical engineering because he loves working with tools。 B、 points out that there are enough people to fill thejobs that don ’t need much skill 。 C、points out that the US doesn’t manu facture anything anymore。 D、believes that it is important to keep a close eye on the age of his workers。 [E] says that for factory owners，workers are harder to find because of stiff competition。 [F] points out that a work/life balance can attract young people into manufacturing。 [G] says that the manufacturing recession is to15 blame for the lay-off the young people’s parents 。 41.Jay Deuwell______________ 42.Jason Stenquist______________ 43.Birgit Klohs______________ 44.Rob Spohr______________ 45.Julie Parks______________ 41__________ 42 43 44 45

  查看最佳答案

• A share of common stock in a firm represents an ownership interest in that firm and allows stockholders to

  A．vote B．receive dividends． C．receive interest payments． D．only A and B of the abov E．

  查看最佳答案