-
What are the two reasons for the appearance of 0.0.0.0 as the next hop for a network in the show ip bgp command output?()
A . The network was originated via redistribution of an interior gateway protocol into BGP
B . The network was defined by a static route
C . The network was originated via a network or aggregate command
D . The network was learned via EBGP
E . The network was learned via IBGP
-
Refer to the exhibit. Based upon the debug output that is shown,
which three statements about HSRP are true?()
https://assets.asklib.com/images/image2/201807301534389957.jpg
A . The router with IP address 172.16.11.111 haspreempt configured.
B . The final active router is the router with IP address 172.16.11.111.
C . The router with IP address 172.16.11.112 has nonpreempt configured.
D . The priority of the router with IP address 172.16.11.112 is preferred over the router with IP address 172.16.11.111.
E . The router with IP address 172.16.11.112 is using default HSRP priority.
F . The IP address 172.16.11.115 is the virtual HSRP IP address.
-
Examine the router output above. Which two items are correct?()https://assets.asklib.com/images/image2/2018072614340978509.jpg
A . If Ethernet 0/2 goesdown, the standby router will take over
B . The local IP address of Router A is 10.1.0.6
C . When Ethernet 0/3 of RouterA comes back up, the priority will become 105
D . Router A will assume the active state if its priority is the highest
E . The local IP address of Router A is 10.1.0.20
-
Router A is unable to reach Router B.Both routers are running ios version 12.0.After reviewing the command output and graphic,what is the most likely cause of the problem?()
A . incorrect bandwidt h configuration
B . incorrect LMI configuration
C . incorrect map statement
D . incorrect IP addre
-
Examine the query and its output executed In an RDBMS Instance:Which three statements are true about the users (other than sys) in the output?()
A . The C # # B_ADMIN user can perform all backup and recovery operations using RMAN only.
B . The C # # C_ADMIN user can perform the data guard operation with Data Guard Broker.
C . The C # # A_ADMIN user can perform wallet operations.
D . The C # # D_ADMIN user can perform backup and recovery operations for Automatic Storage Management (ASM).
E . The C # # B_ADMIN user can perform all backup and recovery operations using RMAN or SQL* Plus.
-
Refer to the exhibit. The output that is shown is generated at a switch. Which three of these statements are true? ()
A . All ports will be in a state of discarding, learning, or forwarding.
B . Thirty VLANs have been configured on this switch.
C . The bridge priority is lower than the default value for spanning tree.
D . All interfaces that are shown are on shared media.
E . All designated ports are in a forwarding state.
F . The switch must be the root bridge for all VLANs on this switch.
-
Refer to the exhibit. Based upon the debug output that is shown, which three statements aboutHSRP are true?()https://assets.asklib.com/images/image2/2018072614385062672.jpg
A . The router with IP address 172.16.11.112 is using default HSRP priority
B . The IP address 172.16.11.115 is the virtual HSRP IP address
C . The priority of the router with IP address 172.16.11.112 is preferred over the router with IPaddress 172.16.11.111
D . The router with IP address 172.16.11.111 haspreempt configured
E . The final active router is the router with IP address 172.16.11.111
F . The router with IP address 172.16.11.112 has nonpreempt configured
-
Based on the exhibited output, which three statements are true?()https://assets.asklib.com/images/image2/2018073014261721235.png
A . All the routes are in the passive mode because R1 is in the query process for those routes.
B . R1 is in AS 200.
C . R1 will load balance between three pat hs to reach the 192.168.1.48/28 prefix because all three paths have the same advertised distance (AD) of 40512000.
D . 40512000 is the advertised distance (AD) via 192.168.1.66 to reach the 192.168.1.48/28 prefix.
E . All the routes are in the passive mod e because these routes are in the hold- down state.
F . The best path for R1 to reach the 192.168.1.48/28 prefix is via 192.168.1.66.
-
Refer to the exhibit. Which two problems are the most likely cause of the exhibited output?()https://assets.asklib.com/images/image2/2018072614371062746.jpg
A . VRRP misconfiguration
B . spanning tree issues
C . transport layer issues
D . physical layer issues
E . HSRP misconfiguratio
-
Based on the exhibited output, which three statements are true?()https://assets.asklib.com/images/image2/2018073010554679971.jpg
A . The route to 10.2.0.0/16 was redistributed into EIGRP.
B . A default route has been redistributed into the EIGRP autonomous system.
C . R1 is configured with the ip summary - address command.
D . R1 is sourcing a n external EIGRP route from Null0.
E . The router at 10.1.1.2 is configured with the ip default - network 0.0.0.0 command.
F . R1 is configured with the variance command.
-
Examine the router output above. Which two items are correct?()https://assets.asklib.com/images/image2/2018073015313735843.jpg
A . The local IP address of Router A is 10.1.0.6.
B . The local IP address of Router A is 10.1.0.20.
C . If Ethernet 0/2 goesdown, the standby router will take over.
D . When Ethernet 0/3 of RouterA comes back up, the priority will become 105.
E . Router A will assume the active state if its priority is the highest.
-
Refer to the exhibit. Which two statements are true about the output from the show standby vlan50 command?()https://assets.asklib.com/images/image2/2018072614270865427.jpg
A . The command standby 1 preempt was added to Catalyst_A
B . Catalyst_A is load sharing traffic in VLAN 50
C . Hosts using the default gateway address of 192.168.1.1 will have their traffic sent to192.168.1.11 even after Catalyst_A becomes available again
D . Hosts using the default gateway address of 192.168.1.2 will have their traffic sent toCatalyst_A
-
Examine the following output: SQL> SELECT index_name,status FROM dba_indexes WHERE status=’UNUSABLE’; INDEX_NAME STATUS------------------------------ ----------- EIND UNUSABLE Which two statements about the above index are true()
A . It is ignored by the query optimizer.
B . It is not used while the index is being rebuilt.
C . The index cannot be rebuilt, and has to be re-created.
D . The index is automatically rebuilt when used the next time
-
Exhibit: Which of the following are true regarding the command output shown in the display (Choose two.)()。https://assets.asklib.com/images/image2/2018072314485611198.png
A . There are at least two routers participating in the RIP process.
B . A ping to 192.168.168.2 will be successful.
C . A ping to 10.0.15.2 will be successful.
D . RtrA has three interfaces participating in the RIP process.
-
Based on the show ip bgp summary output, which two statements are true?()https://assets.asklib.com/images/image2/2018073013510873916.jpg
A . The BGP session to the 10.3.3.3 neighbor is established, but the router has not received any BGP routing updates from the 10.3.3.3 neighbor.
B . The router is attempting to establish a BGP peering session with the 10.2.2.2 neighbor.
C . The router is attempting to establish a BGP peering session with the 10.1.1.1 neighbor.
D . The BGP session to the 10.3.3.3 neighbor is established.
E . The BGP session to the 10.2.2.2 neighbor is established.
F . The BGP session to the 10.1.1.1 neighbor is established.
-
Refer to the exhibit.
Which two problems are the most likely cause of the exhibited output?()
https://assets.asklib.com/images/image2/2018073015323785114.jpg
A . transport layer issues
B . VRRP misconfiguration
C . HSRP misconfiguration
D . physical layer issues
E . spanning tree issue
-
View the Exhibit and examine the output.
Which two statements are true regarding the LISTENER2 listener()
https://assets.asklib.com/images/image2/2018080209445455276.jpg
A . The ORCL instance is registered dynamically with the listener.
B . The ORCL instance is registered statically in the listener.ora file.
C . The number of current client connections handled by the service handler is two.
D . The total number of client connections handled so far by the service handler is two
-
The following commands are issued on a Cisco Router:
https://assets.asklib.com/images/image2/2018072414055053340.jpg
What will the debug output on the console show?()
A . All IP packets passing through the router
B . Only IP packets with the source address of 10.1.1.1
C . All IP packets from 10.1.1.1 to 172.16.1.1
D . All IP Packets between 10.1.1.1 and 172.16.1.1
-
Refer to the exhibit. On the basis of the output generated by the show commands, which twostatements are true?()https://assets.asklib.com/images/image2/2018072615482922294.jpg
A . All interfaces on the switch have been configured as access ports
B . Because it has not been assigned to any VLAN, interface gigabitethernet 0/1 does not appearin the show vlan output
C . Because it is configured as a trunk interface, interface gigabitethernet 0/1 does not appear inthe show vlan output
D . There are no native VLANs configured on the trunk
E . VLAN 1 will not be encapsulated with an 802.1q header
F . VLAN 2 will not be encapsulated with an 802.1q header
-
Refer to the show interface Gi0/1 switchport command output shown in the exhibit. Which twostatements are true about this interface?()https://assets.asklib.com/images/image2/2018072615453856014.jpg
A . This interface is a member of a voice VLAN
B . This interface is a dot1q trunk passing all configured VLANs
C . This interface is a member of VLAN7
D . This interface is configured for access mode
E . This interface is a member of VLAN1
-
Use the output from the router shown in the graphic above to determine which of the following are correct.()https://assets.asklib.com/images/image2/2018072314403482860.jpg
A . Router John uses alink-state routing protocol.
B . Router John will receive routing updates on the Serial0/0 interface.
C . Router John will receive routing updates on the Serial0/1 interface.
D . Router John will send routing updates out the Serial0/0 interface.
E . Router John will send routing updates out the FastEthernet0/0 interface.
F . Router John will send routing updates out the Serial0/1 interface.
-
Which two of the following descriptions are correct according to the displayed output of thecommand show ip bgp summary?()https://assets.asklib.com/images/image2/201807261114347400.jpg
A . The BGP session to the 10.1.1.1 neighbor is established
B . The router is trying to create a BGP peering session with the 10.1.1.1 neighbor
C . The BGP session to the 10.3.3.3 neighbor is created, but the router received no BGP routingupdates from the 10.3.3.3 neighbor
D . The router is attempting to establish a BGP peering session with the 10.2.2.2 neighbor
-
7、以下代码片段编译运行的结果是:int Output=10; boolean b1 = false; if((b1==true) && ((Output+=10)==20)){ System.out.println("We are equal "+Output); } else { System.out.println("Not equal! "+Output); }
A.输出"Not equal! 10"
B.编译错误
C.输出"We are equal 10"
-
Manchester Manufacturing Industries (MMI) manufactures and sells laser printer cartridges for $85 each. Fixed operating costs are $ 580,000 for up to 40,000 units of output. Fixed interest costs are c
A.8,333
B.12,500
C.22,000