Switch R1 is part of the Company VTP domain. What’s true of VTP Pruning within this domain？（）

相似题目

• What is the purpose of the limit switch on gravity davits?（）

  A . To cut off the power when the davits hit the track safety stops B . To stop the davits from going too fast C . To cut off the power when the davits are about 12 inches or more from the track safety stops D . None of the above

  查看最佳答案

• The VLANs in switch R1 are being modified. Which of the following are updated in R1 every time a VLAN is modified？（）

  A . Configuration revision number B . Configuration revision flag field C . Configuration revision reset switch D . Configuration revision database E . None of the other alternatives apply

  查看最佳答案

• You have configured voice VLANs on Catalyst switch R1.  Which two statements are true about the  operation of voice VLANs on this device？ （）

  A .  When the voice VLAN feature is enabled， all untagged traffic is sent according to the default  CoS priority of the port. B .  Enabling voice VLANs enables the switch to create multiple queues for traffic that is entering a  port. C .  When voice VLANs are configured on a trunk link， UplinkFast must also be enabled. D .  Voice VLANs are configured to enable the switch to forward frames marked with the proper  CoS values over separate physical links. E .  Enabling voice VLANs enables the switch to forward frames with a specific 802.1P marking.

  查看最佳答案

• When the Catalyst switch R1 is enabled to use VTP，  which information does it advertise on its  trunk ports？（）

  A .  VTP mode B .  STP root status C .  Negotiation status D .  Management domain E .  Configuration revision number

  查看最佳答案

• VTP is configured on switch R1. Which of the following features were added in VTP version 2 that  were not previously supported in VTP version 1？（）

  A . Supports Token Ring VLANs. B . Allows VLAN consistency checks. C . Saves VLAN configuration memory. D . Reduces the amount of configuration necessary. E . Allows active redundant links when used with spanning tree.

  查看最佳答案

• Switch R1 has been configured with Private VLANs.  With that type of PVLAN port should the default gateway be configured？（）

  A .  Trunk B .  Isolated C .  Primary D .  Community E .  Promiscuous F .  None of the other alternatives apply

  查看最佳答案

• Refer to the exhibit. Router R1 is being used as a relay device for autoconfiguration of switch S1.Which configuration will acc omplish this? （）https://assets.asklib.com/images/image2/2018073015150790983.jpg

  A . S1(config)# interface fastethernet 0/1 S1(config - if)# ip helper - address 10.0.0.2 B . S1(config)# interface fastethernet 0/1 S1(config - if)# ip helper - address 20.0.0.1 C . R1(config)# interface fastethernet 0/0 R1(config - if)# ip help er - address 20.0.0.2R 1(config - if)# ip helper - address 20.0.0.3 R1(config - if)# ip helper - address 20.0.0.4 R1(config - if)# exit R1(config)# interface fastethernet 0/1 R1(config - if)# ip helper - address 10.0.0.1 D . R1(config)# interface fastethernet 0/0 R1 (config - if)# ip helper - address 20.0.0.1 R2(config)# interface fastethernet 0/0 R2(config - if)# ip helper - address 20.0.0.1 R3(config)# interface fastethernet 0/0 R3(config - if)# ip helper - address 20.0.0.1 R4(config)# interface fastethernet 0/0 R4(config - if)# ip helper - address 20.0.0.1 E . S1(config)# interface fastethernet 0/1 S1(config - if)# ip helper - address 10.0.0.2 R2(config)# interface fastethernet 0/0 R2(config - if)# ip helper - address 20.0.0.1 R3(config)# interface fastethernet 0/0 R3(config - if) # ip helper - address 20.0.0.1 R4(config)# interface fastethernet 0/0 R4(config - if)# ip helper - address 20.0.0.1

  查看最佳答案

• Switch R1 is configured with VTP.  Which two VTP modes will make R1 capable of creating and  deleting VLANs on itself？ （）

  A .  Client B .  Server C .  Transparent D .  Pass-through E .  No-negotiate

  查看最佳答案

• Assuming that an IP packet is sent from a source address in VLAN1 to a destination address in VLAN2 through a layer-3 switch, which part of the packet will be changed?（）

  A . Layer 2 TTL B . Layer 3 TTL C . Layer 3 source address D . Layer 3 destination addre

  查看最佳答案

• The ISPS Code is a part of （）

  A . SOLAS B . MARPOL C . STCW D . Ballast Water conventio

  查看最佳答案

• Switch R1 is configured to use the VLAN Trunking Protocol （VTP）. What does R1 advertise in its VTP domain？（）

  A . The VLAN ID of all known VLANs，the management domain name，and the total number of trunk links on the switch. B . The VLAN ID of all known VLANs，a 1-bit canonical format （CF1 Indicator），and the switch  configuration revision number. C . The management domain name，the switch configuration revision number，the known VLANs，  and their specific parameters. D . A 2-byte TPID with a fixed value of 0x8100 for the management domain number，the switch  configuration revision number，the known VLANs，and their specific parameters. E . None of the other alternatives apply.

  查看最佳答案

• A Cisco Catalyst switch is part of the CIS network. As an experienced network administrator, you are thinking of filtering the traffic within VLANI00 with the use of a VACL named "test" on that switch. Which of the following command will enable that?（）  

  A . interface vlan 100 ip access-group test in B . interface vlan 100 ip access-group test C . vlan access-map test 100 D . vlan filter test vlan-list 100

  查看最佳答案

• The foremost part of the upper deck is called the（）.

  A . forecastle B . tweendeck C . hatches D . peak tank

  查看最佳答案

• The standing part of a tackle is（）.

  A . all the fall except the hauling part B . the hook that engages the weight to be moved C . that part to which power is applied D . that part of the falls made fast to one of the block

  查看最佳答案

• Switch R1 has been configured with the root guard feature.  What statement is true if the spanning  tree enhancement Root Guard is enabled？ （）

  A .  If BPDUs are not received on a non-designated port， the port is moved into the STP loop- inconsistent blocked state B .  IF BPDUs are received on a PortFast enabled port， the port is disabled. C .  If superior BPDUs are received on a designated port， the interface is placed into the root- inconsistent blocked state. D .  If inferior BPDUs are received on a root port， all blocked ports become alternate paths to the  root bride.

  查看最佳答案

• The ISM code is part of（）.

  A . SOLAS B . STCW C . MARPOL D . High Speed Craft Code

  查看最佳答案

• The Forbidden City is part of the Temple of Heaven.

  查看最佳答案

• What is the topic of the second part of this text?

  查看最佳答案

• What does the writer think is the important part of the sales talk?The important part of the sales talk is to...

  查看最佳答案

• Which of following about the relationship of the upper part of the duodenum is FALSE?

  查看最佳答案

• Which of the following is NOT typically part of the study of culture?

  查看最佳答案

• One of properties of the adjacency pairs is that the form. and content of the first part depends on the type of the second part.

  此题为判断题(对，错)。

  查看最佳答案

• Directions: Each of the following sentences has four underlined parts marked A, B, C, and D. Identify the one that is not correct. Then mark the corresponding letter on the Answer Sheet.

  46. A container weighs more after airis put in, it proves that air has weight. A B C D

  查看最佳答案

• How is the second part of the reading list different from the first part？

  A．More minority authors are represented. B．All of the writers are from North America. C．It includes books from the Post Modern Period. D．In addition to novels, some plays are on the list.

  查看最佳答案