A new Aironet 1200 series AP has been installed in the Company WLAN. What happens when this device is connected to the LAN, with a default configuration?()
相似题目
-
On a cisco aironet 1130ag series standalone access point,the status led is dark blue and blinking. What does this indicate?()
-
Which cisco aironet series has a built-in digital thermometer designed to protect the radio?()
-
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installation mode.When you set the link back to operational mode you loose association to the root bridge. Which action willcorrect the problem?()
-
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it, allthe LEDs on the access point blink together. What does this indicate about the access point?()
-
The IOS of a North American Cisco Aironet 1130AG Series standalone access point has becomecorrupt. You must therefore reload the TFTP firmware. Before you press and hold the MODEbutton. You should verify that the file name is which of the following?()
-
You are using standalone cisco aironet 1400 series wireless bridges for a nine-mile point-to-point wireless link between two buildings. Which distance setting should you use for the bridge configured as the root?()
-
On a Cisco Aironet 1240AG Series standalone access point, the radio LED is dark blue and blinking,but the status LED and Ethernet LED are both off. What does this indicate?()
-
On a cisco aironet 1240ag series standalone access point, the radio led is dark blue and blinking, but the status led and ethernet led are both off. what does this indicate?()
-
On a Cisco Aironet 1130AG Series standalone access point, the status LED is dark blue andblinking. What does this indicate?()
-
What is the maximum recommended height at which a Cisco Aironet 1000 Series controller-based accesspoint should be mounted when using integrated antennas?()
-
You are installing a cisco aironet 1000 series controller-based access point. when you boot it, all the leds on the access point blink together. What does this indicate about the access point?()
-
The Cisco Aironet 1140 Series Access Point draws 12.95 W at the power source. However, whenusing a long Ethernet cable, the device can draw up to how much additional wattage?()
-
You are using standalone Cisco Aironet 1400 Series Wireless Bridges for a nine-mile point-to-pointwireless link between two buildings. Which distance setting should you use for the bridgeconfigured as theroot?()
-
On a Cisco Aironet 1130AG Series standalone access point,the status LED is dark blue andblinking. What does this indicate?()
-
What is the maximum recommended height at which a cisco aironet 1000 series controller-based access point should be mounted when using integrated antennas?()
-
The IOS of a North American Cisco Aironet 1230 Series access point has become corrupt, necessitating the need for a TFTP firmware reload. Before you press and hold the MODE button,what must the file be named in order for the reload to occur?()
-
On a Cisco Aironet 1130AG Series standalone access point, the status LED is dark blue and blinking. What does this indicate?()
-
On a Cisco Aironet 1130 Series autonomous access point, the status indicator is blinking dark blue. What does this indicate?()
-
You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it, allthe LEDs on the access point blink together. What does this indicate about the access point?()
-
On a cisco aironet 1130 series autonomous access point, the status indicator is blinking dark blue. What does this indicate?()
-
On a Cisco Aironet 1240AG Series standalone access point, the radio LED is dark blue andblinking,but the status LED and Ethernet LED are both off. What does this indicate()?
-
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge. Which action will correct the problem?()
-
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode.When you set the link back to operational mode you loose association to the root bridge. Which action will correct the problem?()