-
While running 'lsvg -l rootvg', an administrator notices that the quantity of LPs and PPs are different. What is the likely cause?()
A . The LPs represent a section of logical storage that can be mapped to multiple PPs.
B . The PPs represent the mapping to the physical disk. There will always be either equal or fewer PPs than LPs.
C . The LPs represent a section of logical storage that is mapped to a PP that spans over multiple physical disks.
D . The LP represents a section of logical storage. This is mirrored on the filesystem level which creates a greater number of PPs.
-
During a NIM install, the system stops with the LED code 611.What is the cause of the issue?()
A . A failure to NFS mount filesystems from the NIM client
B . A failure to NFS mount filesystems from the NIM master
C . A failure to retrieve the tftp client info from the NIM master
D . A failure to retrieve the tftp server info from the NIM master
-
During an attempt to 'scp' between two hosts, an error indicating PRNG is not seeded is displayed. What is the likely cause of the error?()
A . The sshd user id is locked.
B . The /var/empty directory needs to be created.
C . PRNG is set to 'no' in the /etc/ssh/sshd_config file.
D . The permissions on /dev/random and /dev/urandom are incorrect.
-
During a NIM install,the system stops with the LED code 611.What is the cause of the issue?()
A . A failure to NFS mount filesystems from the NIM client
B . A failure to NFS mount filesystems from the NIM master
C . A failure to retrieve the tftp client info from the NIM master
D . A failure to retrieve the tftp server info from the NIM master
-
During a NIM install, the system stops with the LED code 611. What is the cause of the issue()?
A . A failure to NFS mount filesystems from the NIM client
B . A failure to NFS mount filesystems from the NIM master
C . A failure to retrieve the tftp client info from the NIM master
D . A failure to retrieve the tftp server info from the NIM master
-
The ‘lsvg -o’ command is run with an output of only rootvg, but the server has another volume group named datavg, which is not displayed. What is the likely cause?()
A . datavg is in an offline state.
B . ‘lsvg -o’ only displays the root volume group.
C . ‘lsvg -o’ only displays the fist volume group.
D . datavg has no filesystems and therefore, is inactive.
-
Refer to the exhibit.HostA cannot ping HostB.Assuming routing is properly configured,what could be the cause of this problem?()
A . HostA is not on the same subnet as its default gateway
B . The address of SwitchA is a subnet address
C . The Fa0/0 interface on RouterA is on a subnet that cannot be used
D . The serial interfaces of the routers are not on the same subnet
E . The Fa0/0 interface on RouterB is using a broadcast addre
-
An administrator has mirrored the root volume group to a second disk, but ’bootlist’ is failing to correctly add the second disk. What is the likely cause of the problem?()
A . The administrator has failed to run ’bosboot -ad <2nd disk>’ prior to the bootlist command.
B . The administrator has failed to run ’bootinfo -B <2nd disk>’ prior to the bootlist command.
C . The administrator has failed to run ’mirrorvg -m rootvg <2nd disk>’ prior to the bootlist command.
D . The administrator has failed to run ’bosboot -ad /dev/ipldevice <2nd disk>’ prior to the bootlist command.
-
The Frame Relay network in the diagram is not functioning properly. What is the cause of the problem?()
A . The Gallant router has the wrong LMI type configured
B . Inverse ARP is providing the wrong PVC information to the Gallant router
C . The S3 interface of the Steele router has been configured with the frame-relay encapsulation ietf command
D . The frame-relay map statement in the Attalla router for the PVC to Steele is not correct
E . The IP address on the serial interface of the Attalla router is configured incorrectly
-
An administrator has mirrored the root volume group to a second disk, but 'bootlist' is failing to correctly add the second disk. What is the likely cause of the problem?()
A . The administrator has failed to run 'bosboot -ad <2nd disk>' prior to the bootlist command.
B . The administrator has failed to run 'bootinfo -B <2nd disk>' prior to the bootlist command.
C . The administrator has failed to run 'mirrorvg -m rootvg <2nd disk>' prior to the bootlist command.
D . The administrator has failed to run 'bosboot -ad /dev/ipldevice <2nd disk>' prior to the bootlist command.
-
The 'lsvg -o' command is run with an output of only rootvg, but the server has another volume group named datavg, which is notdisplayed. What is the likely cause?()
A . datavg is in an offline state.
B . 'lsvg -o' only displays the root volume group.
C . 'lsvg -o' only displays the fist volume group.
D . datavg has no filesystems and therefore, is inactive.
-
Refer to the exhibit,a network administrator cannot establish a telnet session with the indicated router.What is the cause of this failure?()
A . A level 5 password is not set
B . The vty password is missing
C . The console password is missing
D . An ACL is blocking Telnet acce
-
During an attempt to ’scp’ between two hosts, an error indicating PRNG is not seeded is displayed.What is the likely cause of the error?()
A . The sshd user id is locked.
B . The /var/empty directory needs to be created.
C . PRNG is set to ’no’ in the /etc/ssh/sshd_config file.
D . The permissions on /dev/random and /dev/urandom are incorrect.
-
User2 is complaining that he is unable to list the contents of a directory. What is the most likely cause?()
A . User2 needs write permission to the directory.
B . User2 needs both read and write permissions to the directory.
C . User2 needs both read and execute permissions to the directory.
D . User2 needs both write and execute permissions to the directory.
-
What is the likely cause of a system hanging at boot code 557?()
A . The system is configuring network adapters.
B . The system is configuring fibre channel devices.
C . The system is unable to mount the rootvg filesystems.
D . The system is unable to access the installation media.
-
Using splitvg to create a snapshot volume group of rootvg results in an error. What is the most likely cause of the error()
A . There is not an available disk to allocate to the snapshot volume group
B . One of the physical volumes associated with rootvg has a status of "missing"
C . Rootvg is running in enhanced concurrent mode
D . A snapshot volume group cannot be created for the rootvg
-
You need to troubleshoot some problems in the Company VOIP network associated with jitter. What is the cause of jitter? ()
A . Packet drops
B . Transmitting too many small packets
C . Variable queue delays
D . Compression
E . None of the other alternatives apply
-
What is the likely cause of a system hanging at boot code 557()
A . The system is configuring network adapters.
B . The system is configuring fibre channel devices.
C . The system is unable to mount the rootvg filesystems.
D . The system is unable to access the installation media.
-
According to materialism, what is the cause of human behaviour?
-
What is the cause of the problems that people living on parts of the south coast of England face?
-
What is the main cause of the company's rising costs?
A.Import taxes.
B.Publicity.
C.Premises.
-
What is the purpose of the e-mail?
A.To reschedule a trip
B.To confirm an appointment
C.To request a payment
D.To inquire about a special offer
-
What kind of cancer is the sixth-leading cause of cancer-related death worldwide?
-
What is NOT the cause of the recent explosion in academic movement?
A.Many scholars like to find an isolated place in a remote area so that they can concentrate on their researches.
B.Planes can take scholars here and there.
C.There are more people working in similar fields than before.
D.There are more learning centres than before.
此题为多项选择题。