Heavy fuel oils generally have an upper average ash content of 0~1% by weight.Which of the following conditions could be expected if the ash content increase above this amount?（）

相似题目

• Machinery driving fuel oil transfer and fuel oil service pumps must be fitted with a remote means of stopping the machinery from （）.

  A . within the space concerned B . outside the space concerned C . the throttle station D . within the fire room

  查看最佳答案

• Diesel engine fuel oil contamination often results in （）

  A . governor malfunctions B . fuel injection system malfunctions C . high cylinder lube oil temperatures D . low intake temperature

  查看最佳答案

• What color exhaust will be exhibited when a slow speed two-stroke/cycle main propulsion diesel engine, designed to operate on light and heavy fuel oil, is operated on insufficiently preheated heavy fuel oil?（）

  A . White B . Black C . Blue D . Clear

  查看最佳答案

• The sequence of parts in a generally used fuel oil supply system for a main engine is （） (1)tanks in the double bottom (2)centrifuges (3)service tank (4)settling tank (5)viscosity regulator

  A . (1)-(2)-(4)-(3)-(5) B . (1)-(4)-(2)-(3)-(5) C . (1)-(3)-(2)-(4)-(5) D . (1)-(5)-(4)-(2)-(3)

  查看最佳答案

• When running a large, low-speed, main propulsion diesel engine on heavy fuel, which of the following precautions should be observed when switching back over to diesel oil?（）

  A . The diesel oil must never be allowed to mix with the heavy fuel B . The temperature of the fuel from the pre–heater should be gradually reduced after switching over the three–way valve C . The heating steam to the pre-heater should be secured as soon as the diesel fuel passes through the three-way valve D . The heating steam must be secured before the diesel oil passes through the three-way valve

  查看最佳答案

• Fuel oil contamination of an auxiliary diesel engine lube oil can result in（）

  A . an increased flash point B . higher lube oil pressures C . an increased viscosity D . lower lube oil pressure

  查看最佳答案

• Fuel injectors used in heavy fuel oil systems are usually provided with cooling to reduce（）.

  A . cold corrosion of the nozzles B . fuel viscosity for better atomization C . carbon accumulation on the nozzles D . fuel detonation in the cylinder

  查看最佳答案

• Heavy fuel oils when spilled are（）.

  A . more harmful to sea life than lighter oils B . easier to clean up than lighter refined oils C . less harmful to sea life than lighter oils D . not a real threat to marine life

  查看最佳答案

• When centrifuging heavy fuel oil, an important factor to consider is the （） (1) flow rate (2) viscosity of the fuel oil

  A . (1) only is correct B . (2) only is correct C . both (1) and (2) are correct D . neither (1) or (2) are correct

  查看最佳答案

• There will usually be summaries or daily account tables for heavy oil, diesel oil, lubricating oil, and fresh water, which will be compiled（）

  A . at the beginning of every watch B . at the beginning of the first watch every day C . at the completion of every watch D . at noon every day

  查看最佳答案

• Main engines as well as auxiliary engines operating on heavy fuel should have continuous on the lubricating oil, either according to the bypass or batch principles（）

  A . filtering B . centrifuging C . depositing D . operating

  查看最佳答案

• Lubricating oil should be changed on a heavy duty diesel engine when（）.

  A . it gets dark in color B . a sample rubbed between fingers feels thin C . it has been in use for a specified interval D . it no longer supports combustio

  查看最佳答案

• When preparing a ship for heavy weather，fuel oil day tanks should be（）.

  A . pumped overboard to calm the seas B . drained to the lower hull to reduce free surfaces C . filled to ensure that sufficient fuel oil is available during a lengthy emergency D . partially drained to increase free surfaces in order to reduce motio

  查看最佳答案

• If fuel oil were being discharged from the waster outlet of a fuel oil disk type centrifuge, operated as separator, you should（）

  A . remove the discharge ring B . re-prime the purifier C . the centrifuge to its proper speed D . install an additional discharge ring

  查看最佳答案

• The specific gravity of fuel oil is a （）.

  A . absolute value B . relative value C . constant value D . set value

  查看最佳答案

• A dirty fuel oil filter is can be detected by （） Ⅰ.fuel oil analysis Ⅱ.observing the pressure drop across the filter

  A . Ⅰonly B . Ⅱonly C . eitherⅠorⅡ D . neitherⅠnor

  查看最佳答案

• We（）this port for replenishment of fuel oil.

  A . is calling at B . are calling at C . is calling on D . are calling o

  查看最佳答案

• Injectors for use with heavy fuel oil must be cooled by either water or light oil to （）

  A . prevent heat corrosion to internal components B . increase fuel delivery rate and economy C . prevent pre-ignition D . avoid carbonization of the nozzle ti

  查看最佳答案

• Heavy residual fuel oils are heated prior to centrifuging to （）

  A . reduce fuel weight B . increase specific gravity C . separate fuel from lube oil D . reduce fuel viscosity

  查看最佳答案

• （EMB145）FCOC（Fuel Cooled Oil Cooler）装在（）

  A . FDMU的下游 B . FDMU的上游 C . 在FPMU的齿轮泵和离心泵之间

  查看最佳答案

• When fuel oil has seriously contaminated a diesel engine lubricating oil, you should （）.

  A . filter to remove the fuel oil B . use the settler to remove the fuel oil C . remove the fuel oil by centrifuging D . drain and then renew the lube oil supply

  查看最佳答案

• In order to benefit from the use of storm oil in heavy seas，the storm oil should be spread （）.

  A . around the rudder and screws B . completely around the vessel C . to leeward of the vessel D . to windward of the vessel

  查看最佳答案

• When the heavy fuel oil is heated to achieve the viscosity of 10-15 cSt, may occurTo avoid this, a system is used in most occasions.

  A.boiling and cavitations; low temperature B.boiling and cavitations; pressurized C.leaking and boiling; low temperature D.leaking and boiling; pressurized

  查看最佳答案

• In purification, there is no fuel oil in the clean oil outlet.It could be caused by _____. I.too high temperature of the dirty fuel oil; II. too low temperature of the dirty fuel oil; III. Clogged filter

  A．I B．I．II．III C．II．III D．II

  查看最佳答案