LPAR1 is configured to have the same 2 LUNs virtualized by a redundant pair of VIO servers. Which command will validate thatboth storage paths are available?（）

相似题目

• A client is configuring an x3650 M3. Once the system is in production， they need to able to remotely view and make changes to the UEFI interface. Which of the following is the correct way to configure this？（）

  A . Configure the RSA with an IP address B . Configure the BMC with an IP address C . Configure the AMM with an IP address D . Configure the IMM with an IP addre

  查看最佳答案

• An engineer is preparing an implementation plan in which the configuration needs to influence BGP's choice of best path. Which of the following is least likely to be used by the configuration in this imple mentation plan?（）

  A . Weight B . Origin code C . AS_Path D . Local_Pref

  查看最佳答案

• An Enterprise customer wants to reduce the configuration effort for their Teleworker router deployments. What is one way to simplify the IPSec-related configuration in the remote routers?（）

  A . CiscoWorks VPN Manager  B . deploy Linksys routers with menu-driven configuration C . Easy VPN client mode  D . disable 802.1x and Auth Proxy on the Teleworker router

  查看最佳答案

• Which command is used to configure RMAN to perform a compressed backup for every backup executed？（）

  A .  BACKUP AS COMPRESSED BACKUPSET DATABASE B .  BACKUP AS COMPRESSED COPY OF DATABASE C .  CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET D .  CONFIGURE DEVICE TYPE DISK BACKUP TYPE COMPRESS  E .  BACKUP DATABASE COMPRESS

  查看最佳答案

• LPAR1 is configured to have the same 2 LUNs virtualized by a redundant pair of VIO servers.  Which command will validate that both storage paths are available？（）

  A . Lspath B . sdd query adapter C . pcmpath query adapter D . datapath query device

  查看最佳答案

• Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）

  A . Set the SSID value in the client software to public. B . Configure open authentication on the AP and the client. C . Set the SSID value on the client to the SSID configured on the AP. D . Configured MAC address filtering to permit the client to connect to the AP.

  查看最佳答案

• What is the correct sequence of commands to configure and verify SRM with SSO redundancy? （）

  A . mode sso, redundancy, show redundancy states B . show redundancy states, mode sso, redundancy C . redundancy, mode sso, show redundancy states D . show redundancy states, redundancy, mode sso

  查看最佳答案

• What are the basic configuration steps to enable IS - IS?（）

  A . Configure the net system - id command under routerisis and enable IS - IS on each interface with the ip router isis command. B . Configure the net sy stem - id and the network net - id commands under routerisis. C . Configure the network net - id command(s) under routerisis and enable IS - IS on each interface with the ip router isis command. D . Configure the network net - id command(s) and the is - type level -1- 2 command under routerisis. E . Configure the net system - id and the network net - id commands under routerisis and enable ISIS on each interface with the ip router isis command.

  查看最佳答案

• Which tool or interface is used to configure debug parameters for log files?（）

  A . license information B . Alarm and Trace Configuration  C . CRS Installer  D . Control Center

  查看最佳答案

• Which command is used to configure a default route?（）

  A . ip route 172.16.1.0 255.255.255.0 0.0.0.0 B . ip route 172.16.1.0 255.255.255.0 172.16.2.1 C . ip route 0.0.0.0 255.255.255.0 172.16.2.1 D . ip route 0.0.0.0 0.0.0.0 172.16.2.1

  查看最佳答案

• Which additional configuration step is necessary in order to connect to an access point that has SSID broadcasting disabled?（）

  A . Set the SSID value in the client software to public. B . Configure open authentication on the AP and the client. C . Set the SSID value on the client to the SSID configured on the AP D . Configure MAC address filtering to permit the client to connect to the AP

  查看最佳答案

• Which configuration is used to enable root guard？（）

  A . interface gig3/1 spanning-tree guard root B . interface gig3/1 spanning-tree root guard C . interface gig3/1 spanning-tree root-guard D . interface gig3/1 spanning-tree root-guard default

  查看最佳答案

• Refer to the exhibit.What is the effect of the configuration that is shown?（）

  A . It tells the router or switch to try establish an SSH connection first and if that fail to use telnet. B . It configures a cisco network device to use the SSH protocol on incoming communications via the virtual terminal ports. C . It allows seven failed login attempts before the VTY lines are temporarily shutdown. D . It configures the virtual terminal lines with the password 030752180500. E . It configures SSH globally for all logins.

  查看最佳答案

• Refer to the diagram. Which OSPF configuration command is required to configure Area 3 a s atotally stubby area?（）https://assets.asklib.com/images/image2/2018073011334294346.jpg

  A . On the ABR router ospf 10 area 3 stub B . On all Area 3 routers router ospf 10 area 3 stub C . On all Area 3 routers router ospf 10 area 3 stub no - summary D . On the ABR router ospf 10 area 3 nssa E . On the ABR rou ter ospf 10 area 3 stub no - summary

  查看最佳答案

• Refer to the exhibit. What is the configuration an example of？（）

  A . enabling modular QoS over Frame Relay B . enabling Real-Time Transport Protocol （RTP） header compression C . enabling distributed compressed Transmission Control Protocol D . enabling latency and jitter reduction for Transmission Control traffic E . enabling TCP header compressio

  查看最佳答案

• Which utility is used to configure the WebSEAL Server once the files are installed?（）

  A . pdadmin B . pdconfig C . web_config D . config_we

  查看最佳答案

• What is the name of the file that is used to provide the configuration setting in unattended mode？（）

  A . Answer file. B . Startup file. C . Unattended configuration file. D . Network file.

  查看最佳答案

• Which command is used to initialize and configure a NIM master？（）

  A . /usr/sbin/nim_init B . /usr/bin/installnim C . /usr/sbin/nimconfig D . /usr/sbin/setup_server

  查看最佳答案

• Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）

  A . The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2 B . The configuration is invalid because the DHCP options are global configuration commands C . The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces D . The router will choose which pool to use based upon the interface the DHCP request wasreceived o

  查看最佳答案

• What is the IBM tool used to configure the IBM System Storage DS5000 system？（）

  A . DS Storage Manager B . Tivoli Storage Manager C . Remote Support Manager D . Tivoli Provisioning Manager

  查看最佳答案

• Refer to the exhibit. Which statement is co rrect regarding the router configuration shown？ （）

  <img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/7d97864996209a34c87d227a35adff83.png' /> A. The router will rebroadcast any DHCP requests received by this interface out to all interfaces included in the ip helper - address commands. B. The router will rebroadcast any UDP broadcasts received by this interface out to all interfaces included in the ip helper - address commands. C. The router will unicast any DHCP requests received by this interface out to all addresses included in the ip helper - address commands. D. This configuration will not do anything because the ip helper - address command needs to also be applied to the 192.168.23.1 IP address.

  查看最佳答案

• Which configuration command is used to send debug level events to the console in real time？（）

  <img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/26702676062fb859e8189d08761485ce.jpg' /> A．A B．B C．C D．D

  查看最佳答案

• Network Access Protection （NAP) is configured for the corporate network.Users connect to t

  Network Access Protection (NAP) is configured for the corporate network.Users connect to the corporate network by using portable computers.The company policy requires confidentiality of data when the data is in transit between the portable computers and the servers.You need to ensure that users can access network resources only from computers that comply with the company policy.What should you do？（） A. Create an IPsec Enforcement Network policy. B. Create an 802.1X Enforcement Network policy. C. Create a Wired Network (IEEE 802.3) Group policy. D. Create an Extensible Authentication Protocol (EAP) Enforcement Network policy.

  查看最佳答案