（） for the camshaft gear train is taken from a spur gear which for a six cylinder engine is at the coupling end.
相似题目
-
The camshaft on a four-stroke/cycle diesel engine provides a means to operate the （）.
-
What is the accepted standard for wire rope falls used in connection with the lifeboat gear?（）
-
All gear, such as pilot ladder, accommodation ladder, hoist, etc., necessary for a safe transfer of the pilot is known as（）.
-
I saw your man not operating the winch gear（）gear.
-
Where are the test certificates，for wire rope used as cargo runners，and loose gear certificates usually maintained? （）
-
（）are used for anchor gear in marine work where the chains must withstand the corrosive effects of seawater.
-
Camshafts are usually driven by timing gears or （）.
-
On your vessel，a wire rope for the cargo gear shows signs of excessive wear and must be replaced. In ordering a new wire for this 10-ton boom，what safety factor should you use?（）
-
Where a clause in a charter-party stated Charterers to have full use of the ship’s gear as on board，it was held（）this did not imply that the Charterers were to be responsible for stowage.
-
According to Regulations, a power driven auxiliary steering gear for a vessel capable of a 12 knot service speed, must be able to meet the rudder movement requirements at which of the minimum vessel speeds listed below?（）
-
According to Regulations, a power driven auxiliary steering gear for a vessel capable of a 20 knot service speed, must be capable of producing a rudder movement at which of the minimum speeds listed below?（）
-
When the direction handle of telegraph is moved, the relative position of camshaft and crankshaft will be（）
-
The engine is reversed by axial displacement of the camshafts In order for this to be carried out, the cams are （） with inclined transition faces.
-
Worm geared automatic mooring winches are （） as the multi-start feature reduces the advantage of worm gear iethe high gear radio.
-
The majority of automatic mooring winches are spur geared to improve the backward efficiency of the gear train for rendering（）
-
Positive displacement, helical gear pumps are well suited for pumping oil because （）
-
ALL GEAR,SUCH AS PILOT LADDER,ACCOMMODATION LADDER,HOIST,ETC.,NECESSARY FOR A SAFE TRANSFER OF THE PILOT is known as （）.
-
If a four-stroke/cycle diesel engine is running at 1550 RPM, the speed of the camshaft will be（）.
-
In a four-stroke engines the camshaft rotates at （）.
-
In a four-stroke/cycle diesel engine, the camshaft rotates at （）
-
Because the timing of injection is crucial, （） mounted on the camshaft, which is driven by the crankshaft are used to operate the fuel pumps, one of which is provided for each cylinder.
-
After fitting back in place the gear wheels, don’t forget to （） them.
-
What is the speed of the crankshaft in a four-stroke/cycle engine when the camshaft is turning at 750 rpm?（）
-
Will Americans go for AT&T's plan of pushing the wireless services in the U.S.？