-
A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）
A . In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
B . In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
C . In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
D . In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.
-
Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux. How would access be provided to the storage subsystem devices for this Linux LPAR?（）
A . Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive
B . Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server
C . Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition
D . 3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solutio
-
A patch has been applied to the operating system. After rebooting, the system is hung. Which of the following commands should have been performed to prevent the system from hanging?（）
A . lppchk, bosboot
B . lslpp -l, oslevel
C . installp -C, lppchk
D . bosboot, synclvodm&e
-
A customer has an IBM System Storage DS8100 with 128 DDMs and needs to add additional capacity. What must be verified by the Business Partner during the visit to the computer room（）
A . the space for the upgrade to a DS8700
B . the space on the left of the DS8000 for an expansion frame
C . the space on the right of the DS8000 for an expansion frame
D . the space to install additional DDMs in the base frame
-
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?（）
A . Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
B . Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
C . Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
D . Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.
-
Companycom has a requirement for an LPAR in their p5 595 to run SUSE Linux. They also require an adapter that is not currently supported in Linux. Which of the following would be the best solution to recommend?（）
A . Assign the adapter to an IO Hosting partition
B . Use AIX 5L affinity to move the application from SUSE to AIX
C . Use AIX 5.3 drivers to install the adapter in the Linux LPAR
D . Assign the adapter to an AIX 5.3 partition running Linux Affinity
-
Company.com has a 2 processor license for SLES 9 and a 2 processor license for AIX V5.3. Which of the following LPAR configurations is valid on a 4-way p5-550？（）
A . SLES9：2 dedicated processors AIX： 2.0 processing units,4 virtual processors,uncapped
B . SLES9：2.0 processing units,2 virtual processors,uncapped AIX：2.0 processing units,4 virtual processors,capped
C . SLES9：2.0 processing units,3 virtual processors,uncapped AIX：2 dedicated processors SLES9：2.5 processing units,3 virtual processors,capped
D . AIX：1.5 processing units,2 virtual processors,capped
-
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause？（）
A . The system is waiting for user input to define console type lft0.
B . The system is waiting for user input to define console type tty0.
C . The system is waiting for user input to define console type vty0.
D . The system is waiting for user input to define console type vsa0.
-
A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）
A . 4
B . 8
C . 16
D . 32
-
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause？（）
A . The system is waiting for user input to define console type lft0.
B . The system is waiting for user input to define console type tty0.
C . The system is waiting for user input to define console type vty0.
D . The system is waiting for user input to define console type vsa0.
-
A customer has raised a question about a recently installed LPAR. What command would the administrator run to obtain information about the processor entitlement?（）
A . lscfg -vps
B . prtconf -c
C . lparstat -i
D . lsdev -C -c processor
-
SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?（）
A . SLES does not perform well with DHCP
B . SLES was installed with the default host name of Linux
C . Virtual Network Resources are being used, which is not supported in a SLES environment
D . The SLES instance was installed in 32-bit mode, where 64-bit should have been selected
-
An AIX LPAR has been reconfigured to use direct-attached disks. What is the best way to fully remove and delete the Virtual IO volumes?（）
A . On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
B . On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
C . On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi# On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name
D . On the VIO Server: rmdev -dev rootvg_disk, rmlv rootlv_name On the AIX LPAR: rmdev -dl hdisk#, rmdev -dl vscsi#
-
An administrator wants to have the flexibility to dynamically move a fibre channel PCI card between given LPARs. For each given LPAR how should they add the PCI card to the LPAR profile？（）
A . Add the fibre channel card as hared？Add the fibre channel card as ？hared？
B . Add the fibre channel card as irtual？Add the fibre channel card as ？irtual？
C . Add the fibre channel card as esired？Add the fibre channel card as ？esired？
D . Add the fibre channel card as equired？Add the fibre channel card as ？equired？
-
A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）
A . Dual power supplies.
B . Twice the amount of disk.
C . Two dual-port LHEA adapters.
D . Two dual-port fibre channel adapters.
-
An administrator is creating a new LPAR with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR？（）
A . 0
B . 1
C . 255
D . 256
-
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed， the fibre cables are attached to the adapters. How should the administrator configure the disks？（）
A . Run ’mkdev’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
B . Run ’mkpath’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
C . Run ’chpath’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
D . Run ’cfgmgr’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.
-
An LPAR has hung during a reboot, reporting a 0552LED code. What does this signify?（）
A . varyon of the paging device failed.
B . fsck of the root (/) filesystem failed.
C . varyon of the root volume group failed.
D . IPL device could not be opened or a read failed.
-
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause?（）
A . The system is waiting for user input to define console type lft0.
B . The system is waiting for user input to define console type tty0.
C . The system is waiting for user input to define console type vty0.
D . The system is waiting for user input to define console type vsa0.
-
A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability？（）
A . Dual power supplies.
B . Twice the amount of disk.
C . Two dual-port LHEA adapters.
D . Two dual-port fibre channel adapters.
-
Company.com would like to configure a virtual Ethernet between an AIX V5.3 LPAR and an AIX V5.2 LPAR. Which of the following options is necessary to complete this task？（）
A . Remove the physical Ethernet adapters from the LPARs
B . Activate Advanced POWER Virtualization
C . Update microcode for the virtual adapters
D . Upgrade AIX V5.2 LPAR to AIX V5.3
-
An analyst is assessing a company that entered into a take-or-pay contract during the year and also has significant number of operating leases. Which of the following statement is the least accurate？
A. The company’s financial statements must be adjusted before the analyst compares this company to other companies in its industry.
B. Despite the off-balance sheet nature of take-or-pay contracts and operating leases, an attempt to determine the actual financial position of the company can be garnered from the footnotes.
C. The take-or-pay contracts and operating leases mean that this company has much higher business risk than similar companies that do not use off-balance sheet financing techniques.
-
A map of China_on the wall of the office A is hung B is hunged C has hung D has hunged
请给出答案后说明理由,
-
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters.How should the administrator configure the disks？（）
A.Run ‘mkdev‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
B.Run ‘mkpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
C.Run ‘chpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
D.Run ‘cfgmgr‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.
