The Testking router is running both RIP and IGRP, and the same route is learned by this router from both of these methods. However, when you issue the command"show ip route" you see only the IGRP route, and not the RIP route. Why is this?（）

相似题目

• Router A is unable to reach Router B.Both routers are running ios version 12.0.After reviewing the command output and graphic,what is the most likely cause of the problem?（）

  A . incorrect bandwidt h configuration B . incorrect LMI configuration C . incorrect map statement D . incorrect IP addre

  查看最佳答案

• Refer to the exhibit. Routers A and B are directly connected and running OSPF， but they are unable to form a neighbor relationship. What is the most likely cause？（）https://assets.asklib.com/images/image2/2018072408474251714.jpg

  A .  The routers are not on the same network. B .  The network statements do not match. C .  The process number does not match. D .  The MTU does not match. E .  The OSPF cost does not match. F .  There is a physical issue with the cable.

  查看最佳答案

• The following routes exist in the Testking router（）

  A . R 12.18.8.0/24 [120/1] via 12.18.2., 00:00:10, Serial0 B . R 12.18.11.0/24 [120/7] via 12.18.9.1, 00:00:03, Serial1 C . C 12.18.1.0/24 is directly connected, Ethernet0 D . R 12.18.5.0/24 [120/15] via 12.18.2.2, 00:00:10, Serial0

  查看最佳答案

• Which of the following describe the process identifier that is used to run OSPF on a router? (Choose two.)（）

  A . It is locally significant. B . It is globally significant. C . It is needed to identify a unique instance of an OSPF database. D . It is an optional parameter required only if multiple OSPF processes are running on the router. E . All routers in the same OSPF area must have the same process ID if they are to exchange routing information.

  查看最佳答案

• Refer to the exhibit. Routers A and B are directly connected and running EIGRP， but they are unable to form a neighbor relationship. What is the most likely cause？ （）https://assets.asklib.com/images/image2/2018072408465468299.jpg

  A .  The network statements are misconfigured. B .  The IP address statements are misconfigured. C .  The autonomous system is misconfigured. D .  There is a physical issue with the cable.

  查看最佳答案

• CDP is running between two TestKing devices. What information is supplied by CDP?（）

  A . Device identifiers B . Capabilities list C . Platform D . Route identifier E . Neighbor traffic data

  查看最佳答案

• Refer to the exhibit. Routers A and B are directly connected and running OSPF， but they are unable to form a neighbor relationship. What is the most likely cause？（）https://assets.asklib.com/images/image2/2018072408592345384.jpg

  A . The routers are not on the same network. B . The network statements do not match. C . The process number does not match. D . The MTU does not match. E . The OSPF cost does not match. F . There is a physical issue with the cable.

  查看最佳答案

• Refer to the exhibit. Routers A and B are directly connected and running EIGRP，but they are unable to form a neighbor relationship. What is the most likely cause？（）https://assets.asklib.com/images/image2/2018072408555718181.jpg

  A . The network statements are misconfigured. B . The IP address statements are misconfigured. C . The autonomous system is misconfigured. D . There is a physical issue with the cable.

  查看最佳答案

• Refer to the exhibit. Routers RTA and RTB are running BGP but the session is active. Whatcommand needs to be added to establish the BGP session？（）https://assets.asklib.com/images/image2/2018072611241650637.jpg

  A . ip route 10.10.10.1 255.255.255.255 s0/0 ip route 10.10.10.1 255.255.255.255 s0/1 B . network 10.10.10.0 C . no synchronization D . neighbor 10.10.10.1 next-hop-self

  查看最佳答案

• Which statement describes the process ID that is used to run OSPF on a router ?（）

  A . It is locally significant and must be the same throughout an area B . It is globally significant and is used to represent the AS number C . It is locally significant and is used to identify an instance of the OSPF database D . It is globally significant and is used to identify OSPF stub area

  查看最佳答案

• You are a senior network administrator at TestKing, and while performing thepassword recovery procedure on your 2500 series Cisco router, you type in thefollowing command:o/r 0x2142What is the purpose of this command?（）

  A . It is used to restart the router. B . It is used to bypass the configuration in NVRAM. C . It is used to enter ROM Monitor mode. D . It is used to view the lost password. E . It is used to save the changes to the configuration.

  查看最佳答案

• Refer to the exhibit. This network is running IS - IS. Router RTC is inside Cloud#1. From the output on RTD, which two statement s are true?（）https://assets.asklib.com/images/image2/2018073015173150382.jpg

  A . Because it is running IS - IS in IP - only mode, RTD will not transmit CLNS packets B . IP routing updates between RTC and RTD will be IP datagrams that are encapsulated by HDLC C . The SNPA for RTE is the source data link address that is used to transmit frames to RTD D . IP routing updates between RTC and RTD will be CLNS datagrams that are encapsulated by HDLC E . The NET for RTE will be 49.0150.0019.06b7.fd5f.00 F . IP routing updates between RTC and RTD will be IP datagrams that a re encapsulated by CLNS

  查看最佳答案

• Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? （）https://assets.asklib.com/images/image2/2018073011042561240.jpg

  A . Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - list 20 out Serial0/0 command cannot be used with association with the outgoing interface. B . All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue to be sent. C . Both outgoing and incoming routing up dates on R1 will be stopped because of the passive - interface Serial0/0 configuration statement. D . All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound updates will continue to be received.

  查看最佳答案

• Which of the following describe the process identifier that is used to run OSPF on a router?（）

  A . It is locally significant. B . It is globally significant. C . It is needed to identify a unique instance of an OSPF database. D . It is an optional parameter required only if multiple OSPF processes are running on the router. E . All routers in the same OSPF area must have the same process ID if they are to exchange routing information.

  查看最佳答案

• When HSRP is configured on a network, which two of these items are provided, which are sharedbetween the routers that run HSRP? （）(Choose two.)

  A . TCP-based hello packets B . the impact of flapping links if timers are too low C . a shared single interface D . the ability to track serial interfaces E . UDP-based hello packet

  查看最佳答案

• When HSRP is configured on a network, which two of these items are provided, which are shared between the routers that run HSRP ?（） (choose two)

  A . Shared single interface B . IP Address C . TCP-based hello packets D . MAC addre

  查看最佳答案

• Based on the following output in a router A running LDP， which statement is true？（）https://assets.asklib.com/images/image2/2018072410265950542.jpg

  A . None of the above. B . The IP address 50.0.0.1/32 is assigned to the non-directly connected LDP neighbor， 50.0.0.4. C . The IP address 50.0.0.1/32 is assigned to one of its own interfaces. D . The IP address 50.0.0.1/32 is assigned to its directly connected LDP neighbor， 50.0.0.4.

  查看最佳答案

• A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with: "Would you like to enter the initial configuration dialog? [yes/no]" Why has this occurred?（）

  A . There is an error in the router DRAM. B . Te IOS image is corrupt. C . The configuration register is set to 0x2142. D . The TFTP server that contains the router configuration file is unreachable. E . A boot system configuration command has placed the router into setup mode.

  查看最佳答案

• Which of the following describe the process identifier that is used to run OSPF on a router (Choose two.)（）。

  A . It is locally significant B . It is globally significant C . It is needed to identify a unique instance of an OSPF database D . It is an optional parameter required only if multiple OSPF processes are running on the router E . All routers in the same OSPF area must have the same process ID if they are to exchange routing informatio

  查看最佳答案

• There is a connectivity problem between the serial 0/0 interface of router TESTKING1 and the serial 0/0 interface of TESTKING2. A leased line point to point circuit is installed between these two routers. The output from the "show interface serial 0/0" command is displayed below for each of these routers:From your observations of the above exhibit, what is the underlying cause of the problem？（）

  <img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/b17dddd730e091bfb3b0a6de92ff9e06.jpg' /> <img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/699d5fe003abc58d748867d706612879.jpg' /> A. The loopback is not set. B. The serial cable is faulty. C. The subnet mask is not configured properly. D. The IP address is not configured properly. E. The Layer 2 frame types are not compatible. F. The keepalive setting is not configured properly.

  查看最佳答案

• After making changes to the router, you issue the &quot;copy running-config startup-config&quot; command to save changes. After reloading the router, the router comes up in setup mode. You again make changes, save them, and reboot. Again,the router comes up in setup mode.What is the most likely cause of this？（）

  A. The NVRAM is corrupted. B. The boot system commands were omitted in the configuration. C. The configuration register setting is incorrect. D. The upgraded configuration incompatible with the hardware platform. E. The upgraded IOS incompatible with the hardware.

  查看最佳答案

• You are the network administrator for The network consists of a single Active Directory domain named All servers run Windows Server 2003. All client computers run Windows XP Professional.purchases a host-connectivity gateway application developed by an independent software vendor. You need to install the application on a Windows Server 2003 computer named TestKing2.A support technician named Marie is assigned to install the application. Marie‘s user account is not a member of the Administrator‘s group on TestKing2. The installation fails and displays an error message stating the user account used for installing the application needs to be a member of the local Administrators group.Your user account is a member of the Domain Admins group. You want to enable Marie to install applications, but you do not want her to be able to make other changes on TestKing2.What should you do？（）

  A. Log on locally on TestKing2 as the local administrator. On TestKing2, in Control Panel, start Add or Remove Programs. Instruct Marie to install the application. B. Use the Run as option to start the Add or Remove Programs Control Panel item on TestKing2. Provide the credentials of the local Administrator account. Instruct Marie to install the application. C. Make Marie‘s user account a member of the local Administrators group on TestKing2. Instruct him to log on locally by using his user account and to install the application. D. Instruct Marie to log on locally and to send a Remote Assistance request to you. Accept the request, and take remote control of the session. On TestKing2, in Control Panel, start Add or Remove Programs. Instruct Marie to install the application.

  查看最佳答案

• You are the network administrator for The network consists of a single Active Directory domain named All servers run Windows Server 2003.A member server named TestKing3 hosts files and folders. On TestKing3, you configure a normal backup to run every night. The backup data will be saved to magnetic tape, and a detailed log file will be generated. The backup job will use an account named BackupUser, which is a member of the Backup Operators group.One week later, you use your Administrator account credentials to log on to TestKing3. You start the Backup utility. However, no backup logs are available.You need to verify that the backup jobs are completing successfully.What should you do？（）

  A.Use a text editor to open C:\windows\security\logs\Backup.log. Search for the dates when backups were scheduled. B. Start the Backup utility by using the Run As option. Provide the account credentials of BackupUser. From the Tools menu, select Report, and then select the most recent report. C. Open the Removable Storage snap-in. Examine the properties of the most recently completed Work Queue object. D. Open the Removable Storage snap-in, and then open the properties of the Operator Requests object. On the General tab, clear the Automatically delete completed requests option

  查看最佳答案