A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOSimage.what function does the router perform next?（）

相似题目

• For best packet switching performance with crypto, what is the recommend packet switching path in a Cisco Teleworker Router?（）

  A . Process Switching B . Silicon Switching  C . Cisco Express Forwarding (CEF) Switching D . Autonomous Switching

  查看最佳答案

• A system administrator types the command to change the hostname of a router. Where on the Cisco IFS is that change stored? （）

  A . NVRAM B . RAM C . FLASH D . ROM E . PCMCIA

  查看最佳答案

• The following command is issued on a Cisco Router： Router（configuration）#logging console warnings Which alerts will be seen on the console？（）

  A . Warnings only B . debugging， informational， notifications， warnings C . warnings， errors， critical， alerts， emergencies D . notifications， warnings， errors E . warnings， errors， critical， alert

  查看最佳答案

• Which feature is an advantage of the Cisco Small Business VPN Router Series?（）

  A . QuickVPN (QVPN) client software for simplified management B . minimal configuration requirements C . 802.1g capabilities and support for multiple wireless networks simultaneously (multiple BSSIDs) D . wireless bridging to overcome the lack of physical network cable

  查看最佳答案

• Which model of the Cisco 1800 Series Integrated Services Router is Modular?（）

  A . 1812 B . 1814 C . 1802 D . 1811 E . 1841

  查看最佳答案

• A Cisco router has been configured with the following command:IP nat pool nat-test 192.168.6.10 192.168.6.20 netmask 255.255.255.0his is an example of what type of NAT?（）

  A . Static NAT B . Dynamic NAT C . Dynamic NAT with overload D . Port Address Translation E . None of the above

  查看最佳答案

• A network administrator is configuring ACLs on a cisco router,to allow traffic from hosts on networks 192.168.146.0,192.168.147.0,192.168.148.0and192.168.149.0 only.Which two ACL statements when combined are the best for accomplishing the task?（）

  A . access-list 10 permit ip 192.168.147.0 0.0.0.255.255 B . access-list 10 permit ip 192.168.149.0 0.0.0.255.255 C . access-list 10 permit ip 192.168.146.0 0.0.0.0.255 D . access-list 10 permit ip 192.168.146.0 0.0.0.1.255 E . access-list 10 permit ip 192.168.148.0 0.0.0.1.255 F . access-list 10 permit ip 192.168.146.0 255.255.255.0

  查看最佳答案

• What is a new feature of the Cisco ISR router? （）

  A . advanced integration module B . FICON ports C . Cisco CallManager 5.0 support D . warm Cisco IOS upgrade feature

  查看最佳答案

• What is the default value of the SPT threshold in Cisco routers？（）

  A .  0 B .  1 C .  2 D .  4 E .  16 F .  infinity

  查看最佳答案

• After making some network changes you power off and then power on your Cisco router. What sequence of events occurs when a router is powered up?（）

  A . Perform POST, locate configuration statements, apply configuration statements, locate Cisco IOS software, and load Cisco IOS software. B . Locate Cisco IOS software, load Cisco IOS software, locate configuration statements, apply configuration statements, and perform POST. C . Test software routines, POST, load configuration files, load Cisco IOS software, test Cisco IOS software. D . POST, locate Cisco IOS software, load the Cisco IOS software, locate configuration statements, and apply configuration statements. E . Load and test IOS, load configuration files, test software routines, POST.

  查看最佳答案

• What is the default maximum transmission unit on the Cisco router ATM interface？（）

  A . 4470 bytes B . 1516 bytes C . 9288 bytes D . 1500 bytes E . 1492 byte

  查看最佳答案

• You are a senior network administrator at TestKing, and while performing thepassword recovery procedure on your 2500 series Cisco router, you type in thefollowing command:o/r 0x2142What is the purpose of this command?（）

  A . It is used to restart the router. B . It is used to bypass the configuration in NVRAM. C . It is used to enter ROM Monitor mode. D . It is used to view the lost password. E . It is used to save the changes to the configuration.

  查看最佳答案

• You are upgrading your Cisco router IOS from a TFTP server over the network. The upgrade procedure is stopped and you are prompted to erase the current flash contents before continuing. What is most plausible reason for this? （）

  A . There is insufficient room for more than one image. B . The router has detected a copy of the current software image on the TFTP server. C . The file can be relocated and not compressed. D . The image to load is a binary executable file.

  查看最佳答案

• Why is the Cisco Integrated Services Router product line A good choice for customers?（）

  A . it isA point product solution that addresses a single need B . it provides customers with an opportunity to increase the number of devices in their network C . it simplifies purchasing because there is only one model to choose. D . it integrates multiple services intoA single platform and reduces operating costs.

  查看最佳答案

• When a Cisco router is configured for SSH, it acts as an （）?

  A . SSH client B . SSH proxy C . SSH server D . SSH and SSL server

  查看最佳答案

• What is the recommended Cisco DSCP value for a switch or router passing Cisco Unified Wireless IP Phone 7921G RTP packets?（）

  A . CS3 B . CS1 C . EF D . 5 E . 6

  查看最佳答案

• Refer to the exhibit. The DHCP configuration that is shown is configured on a Cisco router. Whichstatement is true？（）

  A . The router will distribute IP addresses from pool 1 until its addresses are exhausted. Then therouter will begin distributing addresses from pool 2 B . The configuration is invalid because the DHCP options are global configuration commands C . The configuration is incomplete until the DHCP pools are bound to the appropriate interface orinterfaces D . The router will choose which pool to use based upon the interface the DHCP request wasreceived o

  查看最佳答案

• A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS  image. What function does the router perform next?（）

  A . It checks the configuration register. B . It attempts to boot from a TFTP server. C . It loads the first image file in flash memory. D . It inspects the configuration file in NVRAM for boot instructions.

  查看最佳答案

• What is the first step that you would use Cisco Product Advisor for when selecting a router for an Edge solution？（）

  A .  determine types of protocols to be supported B .  determine the environment in which the router will be used C .  select the number of WAN ports required D .  select the number of LAN ports required

  查看最佳答案

• A Cisco router has been configured, and the copy running-config startup-config command has been issued. When the router is power cycled, the router prompts with: "Would you like to enter the initial configuration dialog? [yes/no]" Why has this occurred?（）

  A . There is an error in the router DRAM. B . Te IOS image is corrupt. C . The configuration register is set to 0x2142. D . The TFTP server that contains the router configuration file is unreachable. E . A boot system configuration command has placed the router into setup mode.

  查看最佳答案

• While troubleshooting a network problem,a technician discovers that the current copy of the Cisco IOS is outdated and needs to be updated.Which of the following commands would the technician issue to replace the Cisco router IOS with the newer version?（）

  A . Router#copy tftp flash B . Router(config)#restore flash C . Router(config)#repair flash D . Router#copy flash run E . Router>copy start flash F . Router#copy start flash

  查看最佳答案

• What is the OSPF default frequency,in seconds,at which a cisco router sends hello packets on a multi-access network?（）

  A . 10 B . 40 C . 30 D . 20

  查看最佳答案

• For Ethernet-to-Ethernet routers, such as the Cisco 831 behind a cable modem or DSL bridge, a traffic shaper is configured. This is required since the output 10-Mbps interface will not be congested. Which two statements are true?（）

  A . The parent policy-map shapes and the child policy-map queues. B . The mean-rate and burst-size must always be the same value. C . This will not work without a Dialer interface configured. D . The shaper provides congestion feedback.

  查看最佳答案

• A cisco router is booting and has just completed the POST process.It is now ready to find and load an IOS image.what function does the router perform next？（）

  A . It checks the configuration register B . It attempts to boot from a TFTP server C . It loads the first image file in flash memory D . It inspects the configuration file in NVRAM for boot instructio

  查看最佳答案