The boot .net.tcp.client fileset is broken. Which of the following procedures must be performed to fix the problem?（）

相似题目

• An administrator has added hdisk2 to rootvg and would like to create a boot logical volume on the disk so it can be used as the primary boot partition on the next reboot. Which command should the administrator use？（） 

  A . bosboot -ad hdisk2 B . mkblv -y bootlv hdisk2 C . crlv -t bootlv -d hdisk2 D . bootlist -om normal hdisk2

  查看最佳答案

• After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order?（）

  A . Run a bosboot -a command B . Mirror the hd5 on the two disks C . Set up another service mode bootlist D . Check the disks using a lsvg -p rootvg command

  查看最佳答案

• During system boot， the boot process hangs at LED 0551.  Which of the following is a likely cause（）

  A . A network problem B . corrupted filesystem C . corrupted ODM D . corrupted /etc/inittab file

  查看最佳答案

• Which two locations can be configured as a source for the IOS image in the boot system command?（）

  A . RAM B . NVRAM C . flash memory D . HTTP server E . TFTP server F . Telnet server

  查看最佳答案

• An administrator has added hdisk2 to rootvg and would like to create a boot logical volume on the disk soit can be used as theprimary boot partition on the next reboot. Which command should the administrator use?（）

  A . bosboot -ad hdisk2 B . mkblv -y bootlv hdisk2 C . crlv -t bootlv -d hdisk2 D . bootlist -om normal hdisk2

  查看最佳答案

• During system boot， the system hangs at LED 0C31. What is the first step the system administrator should take to correct the problem？（）

  A . Check system console connections B . Check system network connections C . Boot in service mode and change the bootlist D . Boot from the AIX installation media and mount rootvg filesystem

  查看最佳答案

• A user reports a corrupted boot logical volume. In order to recreate the contents of the boot logical volume which of the following procedures should the user be advised to perform?（）

  A . Reboot the system in normal mode. B . Use the bosboot command to rebuild the boot image. C . Restore the boot logical volume from a mksysb image. D . Reboot the system into maintenance mode and run fsck on the boot logical volume.

  查看最佳答案

• When booting the p5 590 server in full system partition mode, which location is preferred for the fastest boot?（）

  A . A SAN device B . First I/O drawer C . Any I/O drawer within the main frame D . First I/O drawer within the expansion frame

  查看最佳答案

• The system hangs at boot time after starting NFS services.What is the most likely cause?（）

  A . The action parameter of rcnfs in /etc/inittab is 'off' and the script called is not exiting. B . The action parameter of rcnfs in /etc/inittab is 'wait' and the script called is not exiting. C . The action parameter of rcnfs in /etc/inittab is 'once' and the script called is not exiting. D . The action parameter of rcnfs in /etc/inittab is 'respawn' and the script called is not exiting.

  查看最佳答案

• Following a system boot， the display indicates that previously detected hardware is missing.  Which of the following commands would identify the missing hardware（）

  A . diag B . Iscfg C . cfgmgr D . Isslot

  查看最佳答案

• During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）

  A . Because of damaged flash memory， the router will fail the POST B . It will attempt to locate the IOS from a TFTP server. If this fails， it will initiate the setup dialog. C . It will attempt to locate the IOS from a TFTP server. If this fails， it will load a limited IOS from ROM D . It will attempt to locate the configuration file from a TFTP server. If this fails， it will initiate the setup dialog. E . It will attempt to locate the configuration file from a TFTP server. If this fails， it will load a limited configuration from ROM

  查看最佳答案

• During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next（）。

  A . Because of damaged flash memory, the router will fail the POST. B . It will attempt to locate the IOS from a TFTP server. If this fails, it will initiate the setup dialog. C . It will attempt to locate the IOS from a TFTP server. If this fails, it will load a limited IOS from ROM. D . It will attempt to locate the configuration file from a TFTP server. If this fails, it will initiate the setup dialog. E . It will attempt to locate the configuration file from a TFTP server. If this fails, it will load a limited configuration from ROM.

  查看最佳答案

• How can the administrator display the boot paths from which AIX can boot？（）  

  A . bootinfo -r B . lspath -boot C . bosboot -ad hdisk0 D . bootlist -m normal -rv

  查看最佳答案

• Which key should be pressed on an ASCII terminal during the system initialization to force the system to read from the default boot list？（）

  A . 1 B . 3 C . 5 D . 9

  查看最佳答案

• After mirroring rootvg， a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order？（）  

  A . Run a bosboot -a command B . Mirror the hd5 on the two disks C . Set up another service mode bootlist D . Check the disks using a lsvg -p rootvg command

  查看最佳答案

• Which reference code is displayed during the boot process that signals that an administrator may interrupt the boot process to enter the SMS Menu？（）  

  A . 517 B . B0G1 C . E1F1 D . 00A8

  查看最佳答案

• Following a system boot，the display indicates that previously detected hardware is missing.  Which of the following commands would identify the missing hardware？（）

  A . diag B . lscfg C . cfgmgr D . lsslot

  查看最佳答案

• What is the likely cause of a system hanging at boot code 557?（）

  A . The system is configuring network adapters. B . The system is configuring fibre channel devices. C . The system is unable to mount the rootvg filesystems. D . The system is unable to access the installation media.

  查看最佳答案

• An AIX server will not boot in normal mode and the server must be booted into maintenance  mode to rebuild the boot logical volume. A NIM master is not defined in this environment.  How is the system booted into maintenance mode to perform this task （）

  A . Apply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually. B . Boot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode. C . Apply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume. D . Boot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.

  查看最佳答案

• Which reference code is displayed during the boot process that signals that an administrator may interrupt the boot process to enter the SMS Menu?（）

  A . 517 B . B0G1 C . E1F1 D . 00A8

  查看最佳答案

• How can the administrator display the boot paths from which AIX can boot?（）

  A . bootinfo -r B . lspath -boot C . bosboot -ad hdisk0 D . bootlist -m normal -rv

  查看最佳答案

• The system hangs at boot time after starting NFS services. What is the most likely cause？（） 

  A . The action parameter of rcnfs in /etc/inittab is ’off’ and the script called is not exiting. B . The action parameter of rcnfs in /etc/inittab is ’wait’ and the script called is not exiting. C . The action parameter of rcnfs in /etc/inittab is ’once’ and the script called is not exiting. D . The action parameter of rcnfs in /etc/inittab is ’respawn’ and the script called is not exiting

  查看最佳答案

• What is the likely cause of a system hanging at boot code 557（）  

  A . The system is configuring network adapters. B . The system is configuring fibre channel devices. C . The system is unable to mount the rootvg filesystems. D . The system is unable to access the installation media.

  查看最佳答案

• After mirroring rootvg， a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order？（）

  A . Run a bosboot -a command B . Mirror the hd5 on the two disks C . Set up another service mode bootlist D . Check the disks using a lsvg -p rootvg command

  查看最佳答案