-
During system boot， rootvg fails to vary on， causing an LED code of 0552.What is the most likely cause for rootvg not varying on？（）
A . Missing blv
B . Network problem
C . Wrong boot table
D . Corrupted file system
-
After mirroring rootvg, a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order?（）
A . Run a bosboot -a command
B . Mirror the hd5 on the two disks
C . Set up another service mode bootlist
D . Check the disks using a lsvg -p rootvg command
-
A System p administrator has just configured logging system messages with the syslogd daemon. At boot time which file starts the syslog daemon（）
A . /etc/rc.tcpip
B . /sbin/rc.boot
C . /etc/rc.net
D . /etc/rc.d
-
Which two locations can be configured as a source for the IOS image in the boot system command?（）
A . RAM
B . NVRAM
C . flash memory
D . HTTP server
E . TFTP server
F . Telnet server
-
During system boot， the system hangs at LED 0C31. What is the first step the system administrator should take to correct the problem？（）
A . Check system console connections
B . Check system network connections
C . Boot in service mode and change the bootlist
D . Boot from the AIX installation media and mount rootvg filesystem
-
When booting the p5 590 server in full system partition mode, which location is preferred for the fastest boot?（）
A . A SAN device
B . First I/O drawer
C . Any I/O drawer within the main frame
D . First I/O drawer within the expansion frame
-
During reboot， the system hangs with an LED 0554 message that means， "The boot device could not be opened or a read failed." Which of the following recovery procedures should be taken （）
A . Boot in maintenance mode and use fsck to check hd5.
B . Boot in maintenance mode， access the rootvg and check the /etc/inittab for corruption.
C . Boot in maintenance mode， access the rootvg and rebuild the boot image using the bosboot command.
D . Boot in maintenance mode， and reset the root password.
-
The system hangs at boot time after starting NFS services.What is the most likely cause?（）
A . The action parameter of rcnfs in /etc/inittab is 'off' and the script called is not exiting.
B . The action parameter of rcnfs in /etc/inittab is 'wait' and the script called is not exiting.
C . The action parameter of rcnfs in /etc/inittab is 'once' and the script called is not exiting.
D . The action parameter of rcnfs in /etc/inittab is 'respawn' and the script called is not exiting.
-
During system boot， rootvg fails to vary on， causing an LED code of 0552. What is the most likely cause for rootvg not varying on？（）
A . Missing blv
B . Network problem
C . Wrong boot table
D . Corrupted file system
-
During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next?（）
A . Because of damaged flash memory， the router will fail the POST
B . It will attempt to locate the IOS from a TFTP server. If this fails， it will initiate the setup dialog.
C . It will attempt to locate the IOS from a TFTP server. If this fails， it will load a limited IOS from ROM
D . It will attempt to locate the configuration file from a TFTP server. If this fails， it will initiate the setup dialog.
E . It will attempt to locate the configuration file from a TFTP server. If this fails， it will load a limited configuration from ROM
-
During startup, the router displays the following error message: boot: cannot open "flash:" What will the router do next（）。
A . Because of damaged flash memory, the router will fail the POST.
B . It will attempt to locate the IOS from a TFTP server. If this fails, it will initiate the setup dialog.
C . It will attempt to locate the IOS from a TFTP server. If this fails, it will load a limited IOS from ROM.
D . It will attempt to locate the configuration file from a TFTP server. If this fails, it will initiate the setup dialog.
E . It will attempt to locate the configuration file from a TFTP server. If this fails, it will load a limited configuration from ROM.
-
A system administrator has filesystems that should not be mounted during system startup. How can the system administrator prevent the /data filesystem from being mounted during subsequent boots？（）
A . mount -no /data
B . chfs -A no /data
C . mount -t nfs /data
D . chfs -a type=nfs /data
-
During reboot the system hangs with an LED 0554 message that means， "The boot device could not be opened or a read failed." What recovery procedures should be taken？（）
A . Boot in maintenance and use fsck to check hd5.
B . Boot in maintenance mode， access the rootvg and check the /etc/inittab for corruption.
C . Boot in maintenance mode， access the rootvg and rebuild the boot image using the bosboot command.
D . Boot in maintenance mode， access the rootvg and use the bootlist command to create a valid boot list.
-
Which key should be pressed on an ASCII terminal during the system initialization to force the system to read from the default boot list？（）
A . 1
B . 3
C . 5
D . 9
-
After mirroring rootvg， a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order？（）
A . Run a bosboot -a command
B . Mirror the hd5 on the two disks
C . Set up another service mode bootlist
D . Check the disks using a lsvg -p rootvg command
-
Which reference code is displayed during the boot process that signals that an administrator may interrupt the boot process to enter the SMS Menu？（）
A . 517
B . B0G1
C . E1F1
D . 00A8
-
During a boot, which of the following procedures is most likely to present a menu that prompts the user to copy a dump?（）
A . Set the dump device to /dev/hd6.
B . Run sysdumpdev to set the force copy flag for dump to true.
C . Run sysdumpdev to set the force copy flag for dump to false.
D . Increase space in the /tmp directory.&e
-
What is the likely cause of a system hanging at boot code 557?（）
A . The system is configuring network adapters.
B . The system is configuring fibre channel devices.
C . The system is unable to mount the rootvg filesystems.
D . The system is unable to access the installation media.
-
An AIX server will not boot in normal mode and the server must be booted into maintenance mode to rebuild the boot logical volume. A NIM master is not defined in this environment. How is the system booted into maintenance mode to perform this task （）
A . Apply power and when the SMS menus appear press 5 repeatedly to enter a maintenance boot automatically. The system will present a maintenance shell eventually.
B . Boot media such as CDROM or Tape is required to boot into maintenance mode. When inserted into the proper device the system automatically boots into maintenance mode when it can not boot into normal mode.
C . Apply power and the server automatically boots into maintenance mode where you can select your disk to rebuild the boot logical volume.
D . Boot media such as CDROM or Tape is required and an administrator must select the proper SMS menus to get into maintenance mode.
-
During system boot, rootvg fails to vary on, causing an LED code of 0552. What is the most likely cause for rootvg not varying on?（）
A . Missing blv
B . Network problem
C . Wrong boot table
D . Corrupted file system
-
Which reference code is displayed during the boot process that signals that an administrator may interrupt the boot process to enter the SMS Menu?（）
A . 517
B . B0G1
C . E1F1
D . 00A8
-
The system hangs at boot time after starting NFS services. What is the most likely cause？（）
A . The action parameter of rcnfs in /etc/inittab is ’off’ and the script called is not exiting.
B . The action parameter of rcnfs in /etc/inittab is ’wait’ and the script called is not exiting.
C . The action parameter of rcnfs in /etc/inittab is ’once’ and the script called is not exiting.
D . The action parameter of rcnfs in /etc/inittab is ’respawn’ and the script called is not exiting
-
What is the likely cause of a system hanging at boot code 557（）
A . The system is configuring network adapters.
B . The system is configuring fibre channel devices.
C . The system is unable to mount the rootvg filesystems.
D . The system is unable to access the installation media.
-
After mirroring rootvg， a system administrator wants to validate that the system will boot correctly. Which of the following tasks must be performed before changing the boot order？（）
A . Run a bosboot -a command
B . Mirror the hd5 on the two disks
C . Set up another service mode bootlist
D . Check the disks using a lsvg -p rootvg command
