What is the problem with the employee of the fast food restaurant?

相似题目

• What is the most likely problem with this script （） VAR=1   （（VAR=$VAR+1））    while [ $VAR -It 10 ]    do   echo $VAR  done

  A . #!/bin/ksh line is missing B . Variable name VAR is not properly initialized C . Loop variable is not incremented inside the loop D . Replace brackets with brace

  查看最佳答案

• A System p administrator is currently working on a problem with IBM Support. The administrator feels that their expectations are not being met on this problem.  What is the IBM recommended procedure to ensure that the request is handled appropriately （）

  A . Request to change the severity to 1. B . Request to speak to the Duty Manager. C . Request to escalate the problem to development. D . Call IBM Support again and restart the proce

  查看最佳答案

• A system administrator is currently working on a problem with IBM Support. The administrator feels that their expectations are not being met on this problem. What is the IBM recommended procedure to ensure that the request is handled appropriately？（）

  A . Request to change the severity to 1 B . Request to speak to the Duty Manager C . Request to escalate the problem to development D . Request IBM to close the incident and reopen the incident with another call.

  查看最佳答案

• You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but， when you answer， the call is dropped. What may cause this problem？（）

  A . The minimum data rate is not set to 11 Mbps. B . An address resolution protocol is enabled. C . Publicly Secure Packet forwarding is enabled. D . The access point is set to the least congested channel.

  查看最佳答案

• You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN.The phone rings but， when you answer， the call is dropped. What may have caused this problem？（）

  A . Publicly Secure Packet forwarding is enabled. B . The minimum data rate is not set to 11 Mbps. C . An address resolution protocol is enabled. D . The access point is set to the least congested channel.

  查看最佳答案

• Refer to the graphic. R1 is unable to establish an OSPF neighbor relationship with R3. What are possible reasons for this problem?（）https://assets.asklib.com/images/image2/2018072609080359070.png

  A . All of the routers need to be configured for backbone Area 1. B . R1 and R2 are the DR and BDR, so OSPF will not establish neighbor adjacency with R3. C . A static route has been configured from R1 to R3 and prevents the neighbor adjacency from being established. D . The hello and dead interval timers are not set to the same values on R1 and R3. E . EIGRP is also configured on these routers with a lower administrative distance. F . R1 and R3 are configured in different areas.

  查看最佳答案

• Jitter is causing problems with the VOIP application in the network. What causes network jitter？（）

  A . Variable queue delays B . Packet drops C . Transmitting too many small packets D . Compressio

  查看最佳答案

• SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?（）

  A . SLES does not perform well with DHCP B . SLES was installed with the default host name of Linux C . Virtual Network Resources are being used, which is not supported in a SLES environment D . The SLES instance was installed in 32-bit mode, where 64-bit should have been selected

  查看最佳答案

• A lightweight access point has been connected to a Catalyst 3550 24-PWR switch， and on power-up the access point fails. What is the problem with the switch？（）

  A . The power supply has inadequate wattage. B . Power is incorrectly configured on the port. C . It does not support 802.3af Poe. D . Power is not enabled on the port.

  查看最佳答案

• System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）

  A . The LPAR Configuration backup is corrupt B . The LPAR Configuration has been altered using DLPAR C . The LPAR Configuration backup was performed on a different HMC D . The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed

  查看最佳答案

• You are troubleshooting a problem with a Cisco 7920 wireless IP phone on a standalone WLAN. The phonerings but， when you answer， the call is dropped. What may have caused this problem？（）

  A . The minimum data rate is not set to 11 Mbps. B . An address resolution protocol is enabled. C . Publicly Secure Packet forwarding is enabled. D . The access point is set to the least congested channel.

  查看最佳答案

• You are troubleshooting a problem with a cisco 7920 wireless ip phone on a standalone wlan. the phone rings but， when you Answer ，the call is dropped. What may have caused this problem？（）

  A . publicly secure packet forwarding is enabled. B . the minimum data rate is not set to 11 mbps. C . an address resolution protocol is enabled. D . the access point is set to the least congested channel.

  查看最佳答案

• Companycom is trying to communicate with the service processor of the a new p5 590. However, the customer can not access the service processor. What needs to be done to fix this problem?（）

  A . Enable DHCP server on the HMC B . Configure host name and IP address on DNS server C . Manually set the IP address of the service processor D . Connect a RS-232 cable from the HMC to the service processor

  查看最佳答案

• Jitter is causing problems with the VOIP application in the Company network.  What causes  network jitter？（）

  A . Variable queue delays B . Packet drops C . Transmitting too many small packets D . Compressio

  查看最佳答案

• lightweight access point has been connected to a catalyst 3550 24-pwr switch， and on power-up the access point fails. What is the problem with the switch？（）

  A . the power supply has inadequate wattage. B . power is incorrectly configured on the port. C . it does not support 802.3af poe. D . power is not enabled on the port.

  查看最佳答案

• You need to troubleshoot some problems in the Company VOIP network associated with jitter.   What is the cause of jitter？  （）

  A .  Packet drops B .  Transmitting too many small packets C .  Variable queue delays D .  Compression E .  None of the other alternatives apply

  查看最佳答案

• While troubleshooting a routing problem on the company EIGRP network you discover that one ofthe routers is failing to establish adjacencies with its neighbor. What is a likely cause of thisproblem between neighbors？（）

  A . The K-values do not match B . The hold times do not match C . The hello times do not match D . The AS numbers do not match

  查看最佳答案

• Refer to the exhibit. What is the problem with this configuration？（） https://assets.asklib.com/images/image2/201807301056416734.jpg

  A .  Spanning tree PortFast cannot be configured on a port where a voice VLAN is configured. B .  Sticky secure MAC addresses cannot be used on a port when a voice VLAN is configured. C .  Spanning tree PortFast cannot be configured on a port when a sticky secure MAC address is  used. D .  The switch port must be configured as a trunk.

  查看最佳答案

• In terms of memory, what is primary the problem with using eye-witness testimony as evidence in legal cases?

  查看最佳答案

• What is the main problem with this sentence?At ten a.m. this morning, I will drive to my mother's house.

  查看最佳答案

• What does the author say is the problem with women?

  查看最佳答案

• Don’t just complain about what’s wrong with it; suggest some______ ways to solve the problem.

  查看最佳答案

• What is the problem with Russias space station？

  A．It has lost its primary 6xygen sources. B．It has lost its backup oxygen sources. C．It has lost both the primary and the backup oxygen sources. D．It has last neither the primary or the backup oxygen sources.

  查看最佳答案

• What is the problem with the product？

  A．Quality B．Color C．Quantity

  查看最佳答案