To ensure oil purifier working in normal condition,the interval between two sludge discharging should not exceed（） hours.

相似题目

• Oil water separators are used to ensure that ships don’t discharge oil when （） bilge water.

  A . to pump off B . being pumped C . pumping out D . it pumping out

  查看最佳答案

• Which factor determines the ring dam size for a fuel oil, tubular bowl type, centrifugal purifier?（）

  A、The viscosity off the fuel B、The quantity of water to be removed from the fuel C、The specific gravity of the fuel . D、The quantity of dirt to be removed from the fuel

  查看最佳答案

• The fuel oil pressure and forced draught pressure should be matched to ensure good combustion with a full steady flameIn the sentence the word “match” means （）

  A . join with B . mix C . be equal to D . be constant

  查看最佳答案

• The （）is used to burn oil sludge.

  A、clarifier B、oily water separator C、incinerator D、distiller

  查看最佳答案

• In an oily water separator the oil will travel （） to the oil collecting spaces.

  A . upwards B . downwards C . outwards D . forward

  查看最佳答案

• The ability of an oil to separate cleanly from an oil and water mixture is referred to as its （）.

  A . precipitation number B . neutralization number C . pour point D . demulsibility

  查看最佳答案

• Which of the substances listed is satisfactorily removed from the fuel by a centrifugal oil purifier?（）

  A . Impurities B . Lube oil C . Gasoline D . Diesel fuel

  查看最佳答案

• （）are used to ensure that ships don’t discharge oil when pumping out oily water from any oil contaminated space.

  A . Boiler B . Incinerator C . Oily water separator D . Sewage treatment unit

  查看最佳答案

• On board supply vessels, a centrifuge is normally used to purify（）

  A . cooling water B . fuel oil C . sea water D . diesel intake air

  查看最佳答案

• With respect to the flow of lubricating oil through a diesel engine, the lube oil coolers are located after filters in order to （）.

  A . allow filtration of less viscous oil B . decrease the pressure drop across the filter C . improve overall filtration D . all of the above

  查看最佳答案

• Which of the following influences the position of the interface between the liquid seal and the oil in a purifier?（）

  A、Height of the machine B、Temperature of the liquid seal C、Gravity disc D、Bowl diameter

  查看最佳答案

• Oil mist detectors are usually used on board to detect oil mist density within （）.

  A . the engine crankcase B . the engine scavenge boxes C . drain tanks D . fuel tank

  查看最佳答案

• For a purifier changing to a gravity disc with smaller hole diameter will move the interface towards the（）.

  A . bowl periphery B . bowl center C . upper surface D . lower surface

  查看最佳答案

• One of the reasons that causes oil flowed from sludge outlet of a self-cleaning purifier is （）

  A . seal water supply be cut off B . make-up water supply be cut off C . oil outlet valve closed or not open sufficiently D . the flow rate of oil is too much

  查看最佳答案

• The port State control officer will ensure that（）is performed by all crude carriers either required to have a crude oil washing system or where the owner or operator chooses to install a crude oil washing system.

  A . cargo loading operations B . cargo unloading operations C . cargo control operations in the transport D . crude oil washing

  查看最佳答案

• Heavy residual fuel oils are heated prior to centrifuging to （）

  A . reduce fuel weight B . increase specific gravity C . separate fuel from lube oil D . reduce fuel viscosity

  查看最佳答案

• In a purifier, the interface between the liquid seal and the oil should be positioned as close as possible to （）.

  A、the outlet of oil B、the outlet of water C、the bowl periphery D、the center of bowl

  查看最佳答案

• Fuel oil is regularly transferred to the day tank in order to （）

  A . allow impurities to settle out of the fuel B . allow air to escape from the fuel C . make fuel available for immediate use D . all of the above

  查看最佳答案

• Which of the following problems will occur if a disk-type centrifugal lube oil purifier is not properly primed prior to admitting oil flow to the bowl?（）

  A、Contamination of the lube oil by emulsification will result B、The lube oil will not be subjected to the proper centrifugal force C、The lube oil will overheat and flash D、Oil will discharge from the heavy phase discharge port and be wasted.

  查看最佳答案

• The flash point of a residual fuel oil should be used to determine the highest temperature to which oil may be heated （）

  A . for atomizing B . for centrifuging C . in a storage tank D . in the re-circulating line

  查看最佳答案

• To ensure the ship’s general stability，（）.

  A . she's loaded a little deeper forward B . she's loaded a little deeper aft C . she has not any ballast at all D . the cargo is properly distributed throughout the shi

  查看最佳答案

• 词根purg的语义是to purify，unexpurgated的词义是（ ）。

  查看最佳答案

• From the author's point of view, the best way to prevent oil spills is to get rid of oil completely.

  A．Y B．N C．NG

  查看最佳答案

• Passage 1Plants and animals that have been studied carefully seem to have built-in clocks. These biological clocks, as they are called, usually are not quite exact in measuring time. However, they wor

  A、They are used by all plants and animals to tell time. B、Pigeons&39; biological clocks are regulated every day with the sunrise. C、The built-in biological clocks cannot be changed. D、They gradually developed as pigeons grow mature.

  查看最佳答案