During the deck repair,（） should be measured firstly before tail shaft is drawn out.

相似题目

• To “shore up” the main deck for the stowage of deck cargo means to（）.

  A . weld pad eyes on deck in proper position to secure the cargo B . strengthen the main deck by placing pillars underneath it in the tween-decks C . distribute the weight of the cargo by placing fore-and-aft planks on the main deck D . package the cargo in wooden crates so it will not damage the deck

  查看最佳答案

• This used piston had been tested and approved as a spare part by the （） during last annual repair.

  A . agent B . shipchandler C . surveyor D . engineer

  查看最佳答案

• During repair,lubrication lines and orifices must be （）.

  A . taken away B . engaged C . connected D . sealed off

  查看最佳答案

• Prior to taking over the deck watch in port,the relieving officer shall not be informed by the officer in charge of the deck watch as to（）.

  A . the depth of the water at the berth B . the ship‟s draught C . the duty of the relieving officer D . the arrangement of anchor and the scope of the anchor chai

  查看最佳答案

• The heavier outboard strake of deck plating on a ship is called the deck（）.

  A . stiffener B . beam C . stringer D . doubler

  查看最佳答案

• We have just repaired the motorRemember （） to it during your watch.

  A . to pay attention B . paying attention C . pay attention D . your paying attentio

  查看最佳答案

• （）is the head of the Deck Department.

  A . The Chief Officer B . The Second officer C . The Third Officer D . Master

  查看最佳答案

• The deck loads on a ship are distributed through the deck beams to the（）.

  A . frames B . hull C . stringers D . plate

  查看最佳答案

• During the dock repair, each sea valve must be disassembled, cleaned and ground well.Before it reassemble the sealing surface between the valve and the valve seat should be checked by （）

  A . chief engineer B . surveyor C . the engineer D . the technique personnel of the shipyard

  查看最佳答案

• The deck control valve to be（）after being repaired.

  A . moved and fitting again B . removed and refitted C . reproduced and put on again D . return and attached agai

  查看最佳答案

• （）during the last repair?

  A . Did you have No.4 cylinder repair B . Do you have No.4 cylinder repaired C . Didn’t you have No.4 cylinder repairing D . Didn’t you have No.4 cylinder repaired

  查看最佳答案

• During the dock repair, should be measured firstly before tail shaft drawn out（）

  A . the sinking of tail shaft B . the clearance of stern bearing C . the total flexure of shaft D . main engine crankshaft deflectio

  查看最佳答案

• On a ship，the deck stringer is the outboardmost deck（）.

  A . plating B . beam C . stiffener D . stanchio

  查看最佳答案

• The deck plating on a ship is supported primarily by deck longitudinals and deck（）.

  A . girders B . stanchions C . frames D . beam

  查看最佳答案

• The foremost part of the upper deck is called the（）.

  A . forecastle B . tweendeck C . hatches D . peak tank

  查看最佳答案

• Please kindly arrange for shore workers to do（）during loading the heavy cargo on deck as soon as possible.

  A . the work of using lines and chains to secure the cargo on board B . the lash work C . the work of putting dunnage，keeping the cargo in position and not move when the ship is rolling and pitching D . the lashing work

  查看最佳答案

• During the voyage from Dalian to Singapore，my vessel（）heavy damages to the deck fittings.

  A . maintained B . sustained C . pertained D . contained

  查看最佳答案

• The（）is the intermediate deck between upper deck and the inside bottom of the vessel.

  A . forcastle B . tweendeck C . hatches D . peak tank

  查看最佳答案

• （）, where minor repairs are carried out with a ship service, often during a stay in portThis may be remote from a ship repair site.

  A . voyage repairs B . routine docking C . damage repairs D . conversio

  查看最佳答案

• Why couldn't the woman find the repair shop？

  A．She missed the fight turn． B．The man gave her the wrong directions． C．She W3S a bad driver．

  查看最佳答案

• During the dock repair, each sea valve must be disassembled, cleaned and ground wellBefore it reassemble the sealing surface between the valve and the valve seat should be checked by ____.

  A.chief engineer B.surveyor C.the engineer D.the technique personnel of the shipyard

  查看最佳答案

• The fence is in excellent repair.（)

  A.栅栏修好了 B.栅栏很完好

  查看最佳答案

• View the Exhibit to examine the error during the database startup.You open an RMAN session for the database instance. To repair the failure, you executed the following as the first command in the RMAN session:RMAN＞ REPAIR FAILURE;Which statement describes the consequence of the command？（）

  <img src='https://img2.soutiyun.com/ask/uploadfile/2019-03-27/31f166c0cedddf6946f2b336e2153075.jpg' /> A. The command performs the recovery and closes the failures. B. The command only displays the advice and the RMAN script required for repair. C. The command produces an error because the ADVISE FAILURE command has not been executed before the REPAIR FAILURE command. D. The command executes the RMAN script to repair the failure and removes the entry from the Automatic Diagnostic Repository (ADR).

  查看最佳答案