A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）

A . In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active. B . In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active. C . In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active. D . In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.

时间：2022-08-30 09:57:03 所属题库：IBM(000-104)题库

相似题目

A customer has 5 older POWER5 systems and they want to consolidate them onto a POWER6 system. What information is important to analyze when deciding how to design the new machine using the System Planning Tool?（）

A . vmstat and iostat data from the older machines B . The number of CPUs that were installed in the original machines C . Data from Workload Estimator (WLE) and IBM Performance Management (PM) D . Performance data that is collected from the new system after it has been put into productio

查看最佳答案
Companycom has a Linux LPAR on a p5 570 server. The 3rd party storage subsystem devices are not supported by Linux. How would access be provided to the storage subsystem devices for this Linux LPAR?（）

A . Daisy chain the unsupported 3rd party storage subsystem devices with the local SCSI disk drive B . Assuming the 3rd party storage subsystem has AIX support, enable access through a Virtual IO Server C . Assuming the 3rd party storage subsystem has AIX support, implement the Linux partition within an AIX partition D . 3rd party storage is not an option for p5 570 servers and therefore only IBM disk subsystems can be considered as a solutio

查看最佳答案
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters. How should the administrator configure the disks?（）

A . Run 'mkdev' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks. B . Run 'mkpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks. C . Run 'chpath' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks. D . Run 'cfgmgr' to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run 'cfgmgr' to discover and configure the disks.

查看最佳答案
Companycom has a p5 595 with no DVD configured on this server. How can they install the Virtual IO Server code?（）

A . From the HMC B . From a NFS mount C . From a FTP server D . From any CD or DVD drive on another server

查看最佳答案
Companycom has a requirement for an LPAR in their p5 595 to run SUSE Linux. They also require an adapter that is not currently supported in Linux. Which of the following would be the best solution to recommend?（）

A . Assign the adapter to an IO Hosting partition B . Use AIX 5L affinity to move the application from SUSE to AIX C . Use AIX 5.3 drivers to install the adapter in the Linux LPAR D . Assign the adapter to an AIX 5.3 partition running Linux Affinity

查看最佳答案
An LPAR has hung during a reboot， reporting a 0552 LED code. What does this signify？（）

A . varyon of the paging device failed. B . fsck of the root （/） filesystem failed. C . varyon of the root volume group failed. D . IPL device could not be opened or a read failed.

查看最佳答案
Company.com has a 2 processor license for SLES 9 and a 2 processor license for AIX V5.3. Which of the following LPAR configurations is valid on a 4-way p5-550？（）

A . SLES9：2 dedicated processors AIX： 2.0 processing units,4 virtual processors,uncapped B . SLES9：2.0 processing units,2 virtual processors,uncapped AIX：2.0 processing units,4 virtual processors,capped C . SLES9：2.0 processing units,3 virtual processors,uncapped AIX：2 dedicated processors SLES9：2.5 processing units,3 virtual processors,capped D . AIX：1.5 processing units,2 virtual processors,capped

查看最佳答案
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause？（）

A . The system is waiting for user input to define console type lft0. B . The system is waiting for user input to define console type tty0. C . The system is waiting for user input to define console type vty0. D . The system is waiting for user input to define console type vsa0.

查看最佳答案
A customer plans to consolidate two 8-core POWER6 systems with a total of 8 PCI-X adapters, 6 PCIe adapters, and a PCI-X I/O drawer into a 16-core Power 750. Which action allows the most efficient use of existing equipment?（）

A . Populate the Power 750 first then add a GX+ adapter to support PCI-X andPCIe I/O drawer loops. B . Populate the Power 750 first then add 2 GX+ adapters to support PCI-X andPCIe I/O drawer loops. C . Populate the Power 750 first then add a GX++ adapter to support PCI-X andPCIe I/O drawer loops. D . Populate the Power 750 first then add GX+ and GX++ adapters to support PCI-X andPCIe I/O drawer loops.

查看最佳答案
A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）

A . 4 B . 8 C . 16 D . 32

查看最佳答案
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause？（）

A . The system is waiting for user input to define console type lft0. B . The system is waiting for user input to define console type tty0. C . The system is waiting for user input to define console type vty0. D . The system is waiting for user input to define console type vsa0.

查看最佳答案
A customer has 4 POWER6 servers managed by a Hardware Management Console （HMC）. They plan to install a second HMC for redundancy. Which of the following statements correctlydescribes the dual HMC environment？（）

A . To provide the Service Agent function， both HMCs must have Service Agent enabled and a dedicated modem and phone line. B . Authorized users must have the same username and password on both HMCs， so that every user of one HMC is automatically authorized on the other. C . Both HMCs are automatically notified of any changes that occur in the managed systems， so results of changes made to the managed system by one HMC are visible on the D . Both HMCs must be running the same software revision. Software maintenance must be performed on both HMCs at the same time， but one HMC should be disconnected from

查看最佳答案
A customer has raised a question about a recently installed LPAR. What command would the administrator run to obtain information about the processor entitlement?（）

A . lscfg -vps B . prtconf -c C . lparstat -i D . lsdev -C -c processor

查看最佳答案
SuSe Linux Enterprise Server (SLES) has been installed on an LPAR on a p5 570, but the client is having problems directly after installation with slow network performance. What is the most probable cause?（）

A . SLES does not perform well with DHCP B . SLES was installed with the default host name of Linux C . Virtual Network Resources are being used, which is not supported in a SLES environment D . The SLES instance was installed in 32-bit mode, where 64-bit should have been selected

查看最佳答案
An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC?（）

A . An additional switch for the new HMC B . Asynchronous adapters on the new HMC C . The two 570 servers are directly connected to the new HMC D . One 570 is directly connected to the new HMC and the other is directly connected to the existing HMC

查看最佳答案
In order to support Live Partition Mobility (LPM) for a given LPAR between two Power servers, which type of backing device should be chosen for the storage devices presented from the VIO server to the LPAR?（）

A . LUN-backed devices B . File-backed devices C . Logical volume-backed devices D . Network Filesystem-backed （NFS） device

查看最佳答案
A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability?（）

A . Dual power supplies. B . Twice the amount of disk. C . Two dual-port LHEA adapters. D . Two dual-port fibre channel adapters.

查看最佳答案
An administrator wants to deploy a complex LPARenvironment on a 595. What is the most current tool available for documenting the proposed LPAR configuration and determining if there are adequate IO resources?（）

A . LPAR Planning Tool. B . System Planning Tool. C . LPAR Validation Tool. D . System Validation Tool.

查看最佳答案
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed， the fibre cables are attached to the adapters. How should the administrator configure the disks？（）

A . Run ’mkdev’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks. B . Run ’mkpath’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks. C . Run ’chpath’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks. D . Run ’cfgmgr’ to force the FC adapter to log into the SAN， have the SAN LUNs zoned to the server， run ’cfgmgr’ to discover and configure the disks.

查看最佳答案
An LPAR has hung during a reboot, reporting a 0552LED code. What does this signify?（）

A . varyon of the paging device failed. B . fsck of the root (/) filesystem failed. C . varyon of the root volume group failed. D . IPL device could not be opened or a read failed.

查看最佳答案
An administrator is installing AIX 6.1 on a new LPAR and the boot sequence has stalled with reference code 0c31. What is the most likely cause?（）

A . The system is waiting for user input to define console type lft0. B . The system is waiting for user input to define console type tty0. C . The system is waiting for user input to define console type vty0. D . The system is waiting for user input to define console type vsa0.

查看最佳答案
A customer has a requirement for a single AIX LPAR to be highly available. The customer only has enough funding to purchase a single system. Which would be the most critical option to mitigate AIX availability？（）

A . Dual power supplies. B . Twice the amount of disk. C . Two dual-port LHEA adapters. D . Two dual-port fibre channel adapters.

查看最佳答案
An administrator has an existing HMC and POWER6 570 connected to a network switch. The administrator is planning to install two POWER6 570s with a dedicated HMC. Which infrastructure is required for the new HMC？（）

A . An additional switch for the new HMc B . Asynchronous adapters on the new HMc C . The two 570 servers are directly connected to the new HMc D . One 570 is directly connected to the new HMC and the other is directly connected to the existing HMc

查看最佳答案
A new LPAR has been created that needs SAN attached disk for a database. After AIX has been installed, the fibre cables are attached to the adapters.How should the administrator configure the disks？（）

A.Run ‘mkdev‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks. B.Run ‘mkpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks. C.Run ‘chpath‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks. D.Run ‘cfgmgr‘ to force the FC adapter to log into the SAN, have the SAN LUNs zoned to the server, run ‘cfgmgr‘ to discover and configure the disks.

查看最佳答案

A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）

相似题目

推荐题目